[libpng14] Imported from libpng-1.4.13.tar

PNG_UINT_32_MAX in the test for potential overflow in PNG_ROWBYTES.

ANNOUNCE

@@ -1,46 +1,45 @@
 
-Libpng 1.4.13beta02 - January 22, 2013
+Libpng 1.4.13 - February 6, 2014
 
-This is not intended to be a public release.  It will be replaced
-within a few weeks by a public version or by another test version.
+This is a public release of libpng, intended for use in production codes.
 
 Files available for download:
 
 Source files with LF line endings (for Unix/Linux) and with a
 "configure" script
 
-   1.4.13beta02.tar.xz (LZMA-compressed, recommended)
-   1.4.13beta02.tar.gz
-   1.4.13beta02.tar.bz2
+   libpng-1.4.13.tar.xz (LZMA-compressed, recommended)
+   libpng-1.4.13.tar.gz
+   libpng-1.4.13.tar.bz2
 
 Source files with CRLF line endings (for Windows), without the
 "configure" script
 
-   lp1413b02.7z (LZMA-compressed, recommended)
-   lp1413b02.zip
+   lpng1413.7z (LZMA-compressed, recommended)
+   lpng1413.zip
 
 Other information:
 
-   1.4.13beta02-README.txt
-   1.4.13beta02-LICENSE.txt
+   libpng-1.4.13-README.txt
+   libpng-1.4.13-LICENSE.txt
 
-Changes since the last public release (1.4.11):
+Changes since the last public release (1.4.12):
 
-version 1.4.12 [July 10, 2012]
-  Added two images to contrib/pngsuite (1-bit and 2-bit transparent grayscale),
-    and renamed three whose names were inconsistent with those in
-    pngsuite/README.txt.
-  Changed "a+w" to "u+w" in Makefile.in to fix CVE-2012-3386.
-
-version 1.4.13beta01 [January 1, 2013]
   Do not compile PNG_DEPRECATED, PNG_ALLOC and PNG_PRIVATE when __GNUC__ < 3.
   Removed references to png_zalloc() and png_zfree() from the manual.
   Ignore, with a warning, out-of-range value of num_trans in png_set_tRNS().
-
-version 1.4.13beta02 [January 22, 2013]
   Replaced AM_CONFIG_HEADER(config.h) with AC_CONFIG_HEADERS([config.h])
     in configure.ac
   Changed default value of PNG_USER_CACHE_MAX from 0 to 32767 in pngconf.h.
+  Avoid a possible memory leak in contrib/gregbook/readpng.c
+  Removed a redundant test from png_set_IHDR().
+  Revised libpng.3 so that "doclifter" can process it.
+  Changed '"%s"m' to '"%s" m' in png_debug macros to improve portability
+    among compilers.
+  Rebuilt the configure scripts with autoconf-2.69 and automake-1.14.1
+  Removed potentially misleading warning from png_check_IHDR().
+  Quiet set-but-not-used warnings in pngset.c
+  Quiet an uninitialized memory warning from VC2013 in png_get_png().
 
 Send comments/corrections/commendations to glennrp at users.sourceforge.net
 or to png-mng-implement at lists.sf.net (subscription required; visit

CHANGES

@@ -2884,6 +2884,31 @@ version 1.4.13beta02 [January 22, 2013]
     in configure.ac
   Changed default value of PNG_USER_CACHE_MAX from 0 to 32767 in pngconf.h.
 
+version 1.4.13beta03 [June 18, 2013]
+  Avoid a possible memory leak in contrib/gregbook/readpng.c
+  Removed a redundant test from png_set_IHDR().
+  Revised libpng.3 so that "doclifter" can process it.
+
+version 1.4.13beta04 [January 1, 2014]
+  Changed '"%s"m' to '"%s" m' in png_debug macros to improve portability
+    among compilers.
+
+version 1.4.13beta05 [January 10, 2014]
+  Rebuilt the configure scripts with autoconf-2.69 and automake-1.14.1
+  Removed potentially misleading warning from png_check_IHDR().
+
+version 1.4.13beta06 [January 22, 2014]
+  Quiet set-but-not-used warnings in pngset.c
+
+version 1.4.13rc01 [January 28, 2014]
+  No changes.
+
+version 1.4.13rc02 [January 30, 2014]
+  Quiet an uninitialized memory warning from VC2013 in png_get_png().
+
+version 1.4.13 [February 6, 2014]
+  No changes.
+
 Send comments/corrections/commendations to glennrp at users.sourceforge.net
 or to png-mng-implement at lists.sf.net (subscription required; visit
 https://lists.sourceforge.net/lists/listinfo/png-mng-implement).

CMakeLists.txt

@@ -25,7 +25,7 @@ endif()
 project(libpng C)
 enable_testing()
 
-# Copyright (C) 2007-2010 Glenn Randers-Pehrson
+# Copyright (C) 2007-2012 Glenn Randers-Pehrson
 
 # This code is released under the libpng license.
 # For conditions of distribution and use, see the disclaimer
@@ -255,7 +255,7 @@ install(CODE ${PNG_CONFIG_INSTALL_CODE})
 # SET UP LINKS
 if(PNG_SHARED)
   set_target_properties(${PNG_LIB_NAME} PROPERTIES
-#   VERSION 14.${PNGLIB_RELEASE}.1.4.13beta02
+#   VERSION 14.${PNGLIB_RELEASE}.1.4.13
     VERSION 14.${PNGLIB_RELEASE}.0
     SOVERSION 14
     CLEAN_DIRECT_OUTPUT 1)

INSTALL

@@ -1,5 +1,5 @@
 
-Installing libpng version 1.4.13beta02 - January 22, 2013
+Installing libpng version 1.4.13 - February 6, 2014
 
 On Unix/Linux and similar systems, you can simply type
 
@@ -46,7 +46,7 @@ to have access to the zlib.h and zconf.h include files that
 correspond to the version of zlib that's installed.
 
 You can rename the directories that you downloaded (they
-might be called "libpng-1.4.13beta02" or "libpng14" and "zlib-1.2.3"
+might be called "libpng-1.4.13" or "libpng14" and "zlib-1.2.3"
 or "zlib123") so that you have directories called "zlib" and "libpng".
 
 Your directory structure should look like this:
@@ -142,3 +142,23 @@ instead, as demonstrated in contrib/visupng of the libpng distribution.
 Further information can be found in the README and libpng.txt
 files, in the individual makefiles, in png.h, and the manual pages
 libpng.3 and png.5.
+
+Using the ./configure script -- 16 December 2002.
+=================================================
+
+The ./configure script should work compatibly with what scripts/makefile.*
+did, however there are some options you might need to add to configure
+explicitly, which previously was done semi-automatically (if you didn't edit
+scripts/makefile.* yourself, that is)
+
+CFLAGS="-Wall -O -funroll-loops \
+-malign-loops=2 -malign-functions=2" ./configure --prefix=/usr/include \
+--with-pkgconfigdir=/usr/lib/pkgconfig --includedir=/usr/include
+
+You can alternatively specify --includedir=/usr/include, /usr/local/include,
+/usr/include/libpng14, or whatever.
+
+If you find that the configure script is out-of-date or is not supporting
+your platform properly, try running autogen.sh to regenerate "configure",
+"Makefile.in", and the other configuration files. Then try configure again.
+

LICENSE

@@ -10,8 +10,8 @@ this sentence.
 
 This code is released under the libpng license.
 
-libpng versions 1.2.6, August 15, 2004, through 1.4.13beta02, January 22, 2013, are
-Copyright (c) 2004, 2006-2010 Glenn Randers-Pehrson, and are
+libpng versions 1.2.6, August 15, 2004, through 1.4.13, February 6, 2014, are
+Copyright (c) 2004, 2006-2014 Glenn Randers-Pehrson, and are
 distributed according to the same disclaimer and license as libpng-1.2.5
 with the following individual added to the list of Contributing Authors
 
@@ -108,4 +108,4 @@ certification mark of the Open Source Initiative.
 
 Glenn Randers-Pehrson
 glennrp at users.sourceforge.net
-January 22, 2013
+February 6, 2014

Makefile.am

@@ -79,7 +79,7 @@ EXTRA_DIST= \
 	${srcdir}/contrib/pngsuite/* \
 	${srcdir}/contrib/visupng/* \
 	$(TESTS) \
-	example.c libpng-1.4.13beta02.txt
+	example.c libpng-1.4.13.txt
 
 CLEANFILES= pngout.png libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.pc libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@-config libpng.vers \
 libpng.sym

README

@@ -1,4 +1,4 @@
-README for libpng version 1.4.13beta02 - January 22, 2013 (shared library 14.0)
+README for libpng version 1.4.13 - February 6, 2014 (shared library 14.0)
 See the note about version numbers near the top of png.h
 
 See INSTALL for instructions on how to install libpng.
@@ -123,7 +123,7 @@ and ...".  If in doubt, send questions to me.  I'll bounce them
 to others, if necessary.
 
 Please do not send suggestions on how to change PNG.  We have
-been discussing PNG for sixteen years now, and it is official and
+been discussing PNG for nineteen years now, and it is official and
 finished.  If you have suggestions for libpng, however, I'll
 gladly listen.  Even if your suggestion is not used immediately,
 it may be used later.
@@ -167,24 +167,29 @@ Files in this distribution:
        gregbook         =>  source code for PNG reading and writing, from
                             Greg Roelofs' "PNG: The Definitive Guide",
                             O'Reilly, 1999
-       msvctest     =>  Builds and runs pngtest using a MSVC workspace
-       pngminus     =>  Simple pnm2png and png2pnm programs
-       pngsuite     =>  Test images
-       visupng      =>  Contains a MSVC workspace for VisualPng
+       pngminim         =>  Minimal decoder, encoder, and progressive decoder
+                            programs demonstrating use of pngusr.dfa
+       pngminus         =>  Simple pnm2png and png2pnm programs
+       pngsuite         =>  Test images
+       visupng          =>  Contains a MSVC workspace for VisualPng
       projects      =>  Contains project files and workspaces for
                         building a DLL
-       c5builder        =>  Contains a Borland workspace for building
-                            libpng and zlib
        visualc6         =>  Contains a Microsoft Visual C++ (MSVC)
                             workspace for building libpng and zlib
+       visualc71        =>  Contains a Microsoft Visual C++ (MSVC)
+                            workspace for building libpng and zlib
+       vstudio          =>  Contains a Microsoft Visual C++ (MSVC)
+                            workspace for building libpng and zlib
+       xcode            =>  Contains an Apple xcode
+                            workspace for building libpng and zlib
       scripts       =>  Directory containing scripts for building libpng:
        descrip.mms      =>  VMS makefile for MMS or MMK
        makefile.std     =>  Generic UNIX makefile (cc, creates static
                             libpng.a)
        makefile.elf     =>  Linux/ELF makefile symbol versioning,
-                            (gcc, creates libpng14.so.14.1.4.13beta02)
+                            (gcc, creates libpng14.so.14.1.4.13)
        makefile.linux   =>  Linux/ELF makefile
-                            (gcc, creates libpng14.so.14.1.4.13beta02)
+                            (gcc, creates libpng14.so.14.1.4.13)
        makefile.gcc     =>  Generic makefile (gcc, creates static libpng.a)
        makefile.knr     =>  Archaic UNIX Makefile that converts files with
                             ansi2knr (Requires ansi2knr.c from
@@ -206,12 +211,12 @@ Files in this distribution:
        makefile.openbsd =>  OpenBSD makefile
        makefile.sgi     =>  Silicon Graphics IRIX (cc, creates static lib)
        makefile.sggcc   =>  Silicon Graphics
-                            (gcc, creates libpng14.so.14.1.4.13beta02)
+                            (gcc, creates libpng14.so.14.1.4.13)
        makefile.sunos   =>  Sun makefile
        makefile.solaris =>  Solaris 2.X makefile
-                            (gcc, creates libpng14.so.14.1.4.13beta02)
+                            (gcc, creates libpng14.so.14.1.4.13)
        makefile.so9     =>  Solaris 9 makefile
-                            (gcc, creates libpng14.so.14.1.4.13beta02)
+                            (gcc, creates libpng14.so.14.1.4.13)
        makefile.32sunu  =>  Sun Ultra 32-bit makefile
        makefile.64sunu  =>  Sun Ultra 64-bit makefile
        makefile.sco     =>  For SCO OSr5  ELF and Unixware 7 with Native cc

compile

@@ -0,0 +1,347 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand '-c -o'.
+
+scriptversion=2012-10-14.11; # UTC
+
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" ""	$nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+  file=$1
+  case $file in
+    / | /[!/]*) # absolute file, and not a UNC file
+      if test -z "$file_conv"; then
+	# lazily determine how to convert abs files
+	case `uname -s` in
+	  MINGW*)
+	    file_conv=mingw
+	    ;;
+	  CYGWIN*)
+	    file_conv=cygwin
+	    ;;
+	  *)
+	    file_conv=wine
+	    ;;
+	esac
+      fi
+      case $file_conv/,$2, in
+	*,$file_conv,*)
+	  ;;
+	mingw/*)
+	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+	  ;;
+	cygwin/*)
+	  file=`cygpath -m "$file" || echo "$file"`
+	  ;;
+	wine/*)
+	  file=`winepath -w "$file" || echo "$file"`
+	  ;;
+      esac
+      ;;
+  esac
+}
+
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+  func_file_conv "$1"
+  if test -z "$lib_path"; then
+    lib_path=$file
+  else
+    lib_path="$lib_path;$file"
+  fi
+  linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+  lib=$1
+  found=no
+  save_IFS=$IFS
+  IFS=';'
+  for dir in $lib_path $LIB
+  do
+    IFS=$save_IFS
+    if $shared && test -f "$dir/$lib.dll.lib"; then
+      found=yes
+      lib=$dir/$lib.dll.lib
+      break
+    fi
+    if test -f "$dir/$lib.lib"; then
+      found=yes
+      lib=$dir/$lib.lib
+      break
+    fi
+    if test -f "$dir/lib$lib.a"; then
+      found=yes
+      lib=$dir/lib$lib.a
+      break
+    fi
+  done
+  IFS=$save_IFS
+
+  if test "$found" != yes; then
+    lib=$lib.lib
+  fi
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+  # Assume a capable shell
+  lib_path=
+  shared=:
+  linker_opts=
+  for arg
+  do
+    if test -n "$eat"; then
+      eat=
+    else
+      case $1 in
+	-o)
+	  # configure might choose to run compile as 'compile cc -o foo foo.c'.
+	  eat=1
+	  case $2 in
+	    *.o | *.[oO][bB][jJ])
+	      func_file_conv "$2"
+	      set x "$@" -Fo"$file"
+	      shift
+	      ;;
+	    *)
+	      func_file_conv "$2"
+	      set x "$@" -Fe"$file"
+	      shift
+	      ;;
+	  esac
+	  ;;
+	-I)
+	  eat=1
+	  func_file_conv "$2" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-I*)
+	  func_file_conv "${1#-I}" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-l)
+	  eat=1
+	  func_cl_dashl "$2"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-l*)
+	  func_cl_dashl "${1#-l}"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-L)
+	  eat=1
+	  func_cl_dashL "$2"
+	  ;;
+	-L*)
+	  func_cl_dashL "${1#-L}"
+	  ;;
+	-static)
+	  shared=false
+	  ;;
+	-Wl,*)
+	  arg=${1#-Wl,}
+	  save_ifs="$IFS"; IFS=','
+	  for flag in $arg; do
+	    IFS="$save_ifs"
+	    linker_opts="$linker_opts $flag"
+	  done
+	  IFS="$save_ifs"
+	  ;;
+	-Xlinker)
+	  eat=1
+	  linker_opts="$linker_opts $2"
+	  ;;
+	-*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+	*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
+	  func_file_conv "$1"
+	  set x "$@" -Tp"$file"
+	  shift
+	  ;;
+	*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
+	  func_file_conv "$1" mingw
+	  set x "$@" "$file"
+	  shift
+	  ;;
+	*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+      esac
+    fi
+    shift
+  done
+  if test -n "$linker_opts"; then
+    linker_opts="-link$linker_opts"
+  fi
+  exec "$@" $linker_opts
+  exit 1
+}
+
+eat=
+
+case $1 in
+  '')
+     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file 'INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "compile $scriptversion"
+    exit $?
+    ;;
+  cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
+    func_cl_wrapper "$@"      # Doesn't return...
+    ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+  if test -n "$eat"; then
+    eat=
+  else
+    case $1 in
+      -o)
+	# configure might choose to run compile as 'compile cc -o foo foo.c'.
+	# So we strip '-o arg' only if arg is an object.
+	eat=1
+	case $2 in
+	  *.o | *.obj)
+	    ofile=$2
+	    ;;
+	  *)
+	    set x "$@" -o "$2"
+	    shift
+	    ;;
+	esac
+	;;
+      *.c)
+	cfile=$1
+	set x "$@" "$1"
+	shift
+	;;
+      *)
+	set x "$@" "$1"
+	shift
+	;;
+    esac
+  fi
+  shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+  # If no '-o' option was seen then we might have been invoked from a
+  # pattern rule where we don't need one.  That is ok -- this is a
+  # normal compilation that the losing compiler can handle.  If no
+  # '.c' file was seen then we are probably linking.  That is also
+  # ok.
+  exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use '[/\\:.-]' here to ensure that we don't use the same name
+# that we are using for the .o file.  Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
+while true; do
+  if mkdir "$lockdir" >/dev/null 2>&1; then
+    break
+  fi
+  sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+  test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+  test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:

config.guess

@@ -1,14 +1,12 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
-#   Free Software Foundation, Inc.
+#   Copyright 1992-2013 Free Software Foundation, Inc.
 
-timestamp='2009-11-20'
+timestamp='2013-11-29'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
 # (at your option) any later version.
 #
 # This program is distributed in the hope that it will be useful, but
@@ -17,26 +15,22 @@ timestamp='2009-11-20'
 # General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Originally written by Per Bothner.  Please send patches (context
-# diff format) to <config-patches@gnu.org> and include a ChangeLog
-# entry.
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
 #
-# This script attempts to guess a canonical system name similar to
-# config.sub.  If it succeeds, it prints the system name on stdout, and
-# exits with 0.  Otherwise, it exits with 1.
+# Originally written by Per Bothner.
 #
 # You can get the latest version of this script from:
 # http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+#
+# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+
 
 me=`echo "$0" | sed -e 's,.*/,,'`
 
@@ -56,8 +50,7 @@ version="\
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright 1992-2013 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -139,12 +132,33 @@ UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
 UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
 UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
 
+case "${UNAME_SYSTEM}" in
+Linux|GNU|GNU/*)
+	# If the system lacks a compiler, then just pick glibc.
+	# We could probably try harder.
+	LIBC=gnu
+
+	eval $set_cc_for_build
+	cat <<-EOF > $dummy.c
+	#include <features.h>
+	#if defined(__UCLIBC__)
+	LIBC=uclibc
+	#elif defined(__dietlibc__)
+	LIBC=dietlibc
+	#else
+	LIBC=gnu
+	#endif
+	EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+	;;
+esac
+
 # Note: order is significant - the case branches are not exclusive.
 
 case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     *:NetBSD:*:*)
 	# NetBSD (nbsd) targets should (where applicable) match one or
-	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
 	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
 	# switched to ELF, *-*-netbsd* would select the old
 	# object file format.  This provides both forward
@@ -180,7 +194,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 		fi
 		;;
 	    *)
-	        os=netbsd
+		os=netbsd
 		;;
 	esac
 	# The OS release
@@ -201,6 +215,10 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
 	echo "${machine}-${os}${release}"
 	exit ;;
+    *:Bitrig:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE}
+	exit ;;
     *:OpenBSD:*:*)
 	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
 	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
@@ -223,7 +241,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
 		;;
 	*5.*)
-	        UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
 		;;
 	esac
 	# According to Compaq, /usr/sbin/psrinfo has been available on
@@ -269,7 +287,10 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	# A Xn.n version is an unreleased experimental baselevel.
 	# 1.2 uses "1.2" for uname -r.
 	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-	exit ;;
+	# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
+	exitcode=$?
+	trap '' 0
+	exit $exitcode ;;
     Alpha\ *:Windows_NT*:*)
 	# How do we know it's Interix rather than the generic POSIX subsystem?
 	# Should we change UNAME_MACHINE based on the output of uname instead
@@ -295,12 +316,12 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	echo s390-ibm-zvmoe
 	exit ;;
     *:OS400:*:*)
-        echo powerpc-ibm-os400
+	echo powerpc-ibm-os400
 	exit ;;
     arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
 	echo arm-acorn-riscix${UNAME_RELEASE}
 	exit ;;
-    arm:riscos:*:*|arm:RISCOS:*:*)
+    arm*:riscos:*:*|arm*:RISCOS:*:*)
 	echo arm-unknown-riscos
 	exit ;;
     SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
@@ -394,23 +415,23 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     # MiNT.  But MiNT is downward compatible to TOS, so this should
     # be no problem.
     atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
-        echo m68k-atari-mint${UNAME_RELEASE}
+	echo m68k-atari-mint${UNAME_RELEASE}
 	exit ;;
     atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
 	echo m68k-atari-mint${UNAME_RELEASE}
-        exit ;;
+	exit ;;
     *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
-        echo m68k-atari-mint${UNAME_RELEASE}
+	echo m68k-atari-mint${UNAME_RELEASE}
 	exit ;;
     milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
-        echo m68k-milan-mint${UNAME_RELEASE}
-        exit ;;
+	echo m68k-milan-mint${UNAME_RELEASE}
+	exit ;;
     hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
-        echo m68k-hades-mint${UNAME_RELEASE}
-        exit ;;
+	echo m68k-hades-mint${UNAME_RELEASE}
+	exit ;;
     *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
-        echo m68k-unknown-mint${UNAME_RELEASE}
-        exit ;;
+	echo m68k-unknown-mint${UNAME_RELEASE}
+	exit ;;
     m68k:machten:*:*)
 	echo m68k-apple-machten${UNAME_RELEASE}
 	exit ;;
@@ -480,8 +501,8 @@ EOF
 	echo m88k-motorola-sysv3
 	exit ;;
     AViiON:dgux:*:*)
-        # DG/UX returns AViiON for all architectures
-        UNAME_PROCESSOR=`/usr/bin/uname -p`
+	# DG/UX returns AViiON for all architectures
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
 	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
 	then
 	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
@@ -494,7 +515,7 @@ EOF
 	else
 	    echo i586-dg-dgux${UNAME_RELEASE}
 	fi
- 	exit ;;
+	exit ;;
     M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
 	echo m88k-dolphin-sysv3
 	exit ;;
@@ -551,7 +572,7 @@ EOF
 		echo rs6000-ibm-aix3.2
 	fi
 	exit ;;
-    *:AIX:*:[456])
+    *:AIX:*:[4567])
 	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
 	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
 		IBM_ARCH=rs6000
@@ -594,52 +615,52 @@ EOF
 	    9000/[678][0-9][0-9])
 		if [ -x /usr/bin/getconf ]; then
 		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
-                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
-                    case "${sc_cpu_version}" in
-                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
-                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
-                      532)                      # CPU_PA_RISC2_0
-                        case "${sc_kernel_bits}" in
-                          32) HP_ARCH="hppa2.0n" ;;
-                          64) HP_ARCH="hppa2.0w" ;;
+		    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+		    case "${sc_cpu_version}" in
+		      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+		      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+		      532)                      # CPU_PA_RISC2_0
+			case "${sc_kernel_bits}" in
+			  32) HP_ARCH="hppa2.0n" ;;
+			  64) HP_ARCH="hppa2.0w" ;;
 			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
-                        esac ;;
-                    esac
+			esac ;;
+		    esac
 		fi
 		if [ "${HP_ARCH}" = "" ]; then
 		    eval $set_cc_for_build
-		    sed 's/^              //' << EOF >$dummy.c
+		    sed 's/^		//' << EOF >$dummy.c
 
-              #define _HPUX_SOURCE
-              #include <stdlib.h>
-              #include <unistd.h>
+		#define _HPUX_SOURCE
+		#include <stdlib.h>
+		#include <unistd.h>
 
-              int main ()
-              {
-              #if defined(_SC_KERNEL_BITS)
-                  long bits = sysconf(_SC_KERNEL_BITS);
-              #endif
-                  long cpu  = sysconf (_SC_CPU_VERSION);
+		int main ()
+		{
+		#if defined(_SC_KERNEL_BITS)
+		    long bits = sysconf(_SC_KERNEL_BITS);
+		#endif
+		    long cpu  = sysconf (_SC_CPU_VERSION);
 
-                  switch (cpu)
-              	{
-              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
-              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
-              	case CPU_PA_RISC2_0:
-              #if defined(_SC_KERNEL_BITS)
-              	    switch (bits)
-              		{
-              		case 64: puts ("hppa2.0w"); break;
-              		case 32: puts ("hppa2.0n"); break;
-              		default: puts ("hppa2.0"); break;
-              		} break;
-              #else  /* !defined(_SC_KERNEL_BITS) */
-              	    puts ("hppa2.0"); break;
-              #endif
-              	default: puts ("hppa1.0"); break;
-              	}
-                  exit (0);
-              }
+		    switch (cpu)
+			{
+			case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+			case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+			case CPU_PA_RISC2_0:
+		#if defined(_SC_KERNEL_BITS)
+			    switch (bits)
+				{
+				case 64: puts ("hppa2.0w"); break;
+				case 32: puts ("hppa2.0n"); break;
+				default: puts ("hppa2.0"); break;
+				} break;
+		#else  /* !defined(_SC_KERNEL_BITS) */
+			    puts ("hppa2.0"); break;
+		#endif
+			default: puts ("hppa1.0"); break;
+			}
+		    exit (0);
+		}
 EOF
 		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
 		    test -z "$HP_ARCH" && HP_ARCH=hppa
@@ -730,22 +751,22 @@ EOF
 	exit ;;
     C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
 	echo c1-convex-bsd
-        exit ;;
+	exit ;;
     C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
 	if getsysinfo -f scalar_acc
 	then echo c32-convex-bsd
 	else echo c2-convex-bsd
 	fi
-        exit ;;
+	exit ;;
     C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
 	echo c34-convex-bsd
-        exit ;;
+	exit ;;
     C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
 	echo c38-convex-bsd
-        exit ;;
+	exit ;;
     C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
 	echo c4-convex-bsd
-        exit ;;
+	exit ;;
     CRAY*Y-MP:*:*:*)
 	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
 	exit ;;
@@ -769,14 +790,14 @@ EOF
 	exit ;;
     F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
 	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
-        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-        exit ;;
+	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+	FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+	echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
     5000:UNIX_System_V:4.*:*)
-        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-        FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
-        echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+	FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+	echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
 	exit ;;
     i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
 	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
@@ -788,30 +809,35 @@ EOF
 	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
 	exit ;;
     *:FreeBSD:*:*)
-	case ${UNAME_MACHINE} in
-	    pc98)
-		echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
+	case ${UNAME_PROCESSOR} in
 	    amd64)
 		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
 	    *)
-		echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+		echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
 	esac
 	exit ;;
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
 	exit ;;
+    *:MINGW64*:*)
+	echo ${UNAME_MACHINE}-pc-mingw64
+	exit ;;
     *:MINGW*:*)
 	echo ${UNAME_MACHINE}-pc-mingw32
 	exit ;;
+    i*:MSYS*:*)
+	echo ${UNAME_MACHINE}-pc-msys
+	exit ;;
     i*:windows32*:*)
-    	# uname -m includes "-pc" on this system.
-    	echo ${UNAME_MACHINE}-mingw32
+	# uname -m includes "-pc" on this system.
+	echo ${UNAME_MACHINE}-mingw32
 	exit ;;
     i*:PW*:*)
 	echo ${UNAME_MACHINE}-pc-pw32
 	exit ;;
     *:Interix*:*)
-    	case ${UNAME_MACHINE} in
+	case ${UNAME_MACHINE} in
 	    x86)
 		echo i586-pc-interix${UNAME_RELEASE}
 		exit ;;
@@ -848,15 +874,22 @@ EOF
 	exit ;;
     *:GNU:*:*)
 	# the GNU system
-	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
 	exit ;;
     *:GNU/*:*:*)
 	# other systems with GNU libc and userland
-	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC}
 	exit ;;
     i*86:Minix:*:*)
 	echo ${UNAME_MACHINE}-pc-minix
 	exit ;;
+    aarch64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    aarch64_be:Linux:*:*)
+	UNAME_MACHINE=aarch64_be
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
     alpha:Linux:*:*)
 	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
 	  EV5)   UNAME_MACHINE=alphaev5 ;;
@@ -866,52 +899,56 @@ EOF
 	  EV6)   UNAME_MACHINE=alphaev6 ;;
 	  EV67)  UNAME_MACHINE=alphaev67 ;;
 	  EV68*) UNAME_MACHINE=alphaev68 ;;
-        esac
+	esac
 	objdump --private-headers /bin/sh | grep -q ld.so.1
-	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
-	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+	if test "$?" = 0 ; then LIBC="gnulibc1" ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    arc:Linux:*:* | arceb:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     arm*:Linux:*:*)
 	eval $set_cc_for_build
 	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
 	    | grep -q __ARM_EABI__
 	then
-	    echo ${UNAME_MACHINE}-unknown-linux-gnu
+	    echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	else
-	    echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+		| grep -q __ARM_PCS_VFP
+	    then
+		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi
+	    else
+		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf
+	    fi
 	fi
 	exit ;;
     avr32*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     cris:Linux:*:*)
-	echo cris-axis-linux-gnu
+	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
 	exit ;;
     crisv32:Linux:*:*)
-	echo crisv32-axis-linux-gnu
+	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
 	exit ;;
     frv:Linux:*:*)
-    	echo frv-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    hexagon:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     i*86:Linux:*:*)
-	LIBC=gnu
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#ifdef __dietlibc__
-	LIBC=dietlibc
-	#endif
-EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
-	echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+	echo ${UNAME_MACHINE}-pc-linux-${LIBC}
 	exit ;;
     ia64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     m32r*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     m68*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     mips:Linux:*:* | mips64:Linux:*:*)
 	eval $set_cc_for_build
@@ -930,51 +967,63 @@ EOF
 	#endif
 EOF
 	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
 	;;
+    or1k:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
     or32:Linux:*:*)
-	echo or32-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     padre:Linux:*:*)
-	echo sparc-unknown-linux-gnu
+	echo sparc-unknown-linux-${LIBC}
 	exit ;;
     parisc64:Linux:*:* | hppa64:Linux:*:*)
-	echo hppa64-unknown-linux-gnu
+	echo hppa64-unknown-linux-${LIBC}
 	exit ;;
     parisc:Linux:*:* | hppa:Linux:*:*)
 	# Look for CPU level
 	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
-	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
-	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
-	  *)    echo hppa-unknown-linux-gnu ;;
+	  PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
+	  PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
+	  *)    echo hppa-unknown-linux-${LIBC} ;;
 	esac
 	exit ;;
     ppc64:Linux:*:*)
-	echo powerpc64-unknown-linux-gnu
+	echo powerpc64-unknown-linux-${LIBC}
 	exit ;;
     ppc:Linux:*:*)
-	echo powerpc-unknown-linux-gnu
+	echo powerpc-unknown-linux-${LIBC}
+	exit ;;
+    ppc64le:Linux:*:*)
+	echo powerpc64le-unknown-linux-${LIBC}
+	exit ;;
+    ppcle:Linux:*:*)
+	echo powerpcle-unknown-linux-${LIBC}
 	exit ;;
     s390:Linux:*:* | s390x:Linux:*:*)
-	echo ${UNAME_MACHINE}-ibm-linux
+	echo ${UNAME_MACHINE}-ibm-linux-${LIBC}
 	exit ;;
     sh64*:Linux:*:*)
-    	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     sh*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     sparc:Linux:*:* | sparc64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    tile*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     vax:Linux:*:*)
-	echo ${UNAME_MACHINE}-dec-linux-gnu
+	echo ${UNAME_MACHINE}-dec-linux-${LIBC}
 	exit ;;
     x86_64:Linux:*:*)
-	echo x86_64-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     xtensa*:Linux:*:*)
-    	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     i*86:DYNIX/ptx:4*:*)
 	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
@@ -983,11 +1032,11 @@ EOF
 	echo i386-sequent-sysv4
 	exit ;;
     i*86:UNIX_SV:4.2MP:2.*)
-        # Unixware is an offshoot of SVR4, but it has its own version
-        # number series starting with 2...
-        # I am not positive that other SVR4 systems won't match this,
+	# Unixware is an offshoot of SVR4, but it has its own version
+	# number series starting with 2...
+	# I am not positive that other SVR4 systems won't match this,
 	# I just have to hope.  -- rms.
-        # Use sysv4.2uw... so that sysv4* matches it.
+	# Use sysv4.2uw... so that sysv4* matches it.
 	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
 	exit ;;
     i*86:OS/2:*:*)
@@ -1019,7 +1068,7 @@ EOF
 	fi
 	exit ;;
     i*86:*:5:[678]*)
-    	# UnixWare 7.x, OpenUNIX and OpenServer 6.
+	# UnixWare 7.x, OpenUNIX and OpenServer 6.
 	case `/bin/uname -X | grep "^Machine"` in
 	    *486*)	     UNAME_MACHINE=i486 ;;
 	    *Pentium)	     UNAME_MACHINE=i586 ;;
@@ -1047,13 +1096,13 @@ EOF
 	exit ;;
     pc:*:*:*)
 	# Left here for compatibility:
-        # uname -m prints for DJGPP always 'pc', but it prints nothing about
-        # the processor, so we play safe by assuming i586.
+	# uname -m prints for DJGPP always 'pc', but it prints nothing about
+	# the processor, so we play safe by assuming i586.
 	# Note: whatever this is, it MUST be the same as what config.sub
 	# prints for the "djgpp" host, or else GDB configury will decide that
 	# this is a cross-build.
 	echo i586-pc-msdosdjgpp
-        exit ;;
+	exit ;;
     Intel:Mach:3*:*)
 	echo i386-pc-mach3
 	exit ;;
@@ -1088,8 +1137,8 @@ EOF
 	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
 	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
     3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
-        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-          && { echo i486-ncr-sysv4; exit; } ;;
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4; exit; } ;;
     NCR*:*:4.2:* | MPRAS*:*:4.2:*)
 	OS_REL='.3'
 	test -r /etc/.relid \
@@ -1132,10 +1181,10 @@ EOF
 		echo ns32k-sni-sysv
 	fi
 	exit ;;
-    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-                      # says <Richard.M.Bartel@ccMail.Census.GOV>
-        echo i586-unisys-sysv4
-        exit ;;
+    PENTIUM:*:4.0*:*)	# Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+			# says <Richard.M.Bartel@ccMail.Census.GOV>
+	echo i586-unisys-sysv4
+	exit ;;
     *:UNIX_System_V:4*:FTX*)
 	# From Gerald Hewes <hewes@openmarket.com>.
 	# How about differentiating between stratus architectures? -djm
@@ -1161,11 +1210,11 @@ EOF
 	exit ;;
     R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
 	if [ -d /usr/nec ]; then
-	        echo mips-nec-sysv${UNAME_RELEASE}
+		echo mips-nec-sysv${UNAME_RELEASE}
 	else
-	        echo mips-unknown-sysv${UNAME_RELEASE}
+		echo mips-unknown-sysv${UNAME_RELEASE}
 	fi
-        exit ;;
+	exit ;;
     BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
 	echo powerpc-be-beos
 	exit ;;
@@ -1178,6 +1227,9 @@ EOF
     BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
 	echo i586-pc-haiku
 	exit ;;
+    x86_64:Haiku:*:*)
+	echo x86_64-unknown-haiku
+	exit ;;
     SX-4:SUPER-UX:*:*)
 	echo sx4-nec-superux${UNAME_RELEASE}
 	exit ;;
@@ -1204,19 +1256,31 @@ EOF
 	exit ;;
     *:Darwin:*:*)
 	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
-	case $UNAME_PROCESSOR in
-	    i386)
-		eval $set_cc_for_build
-		if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
-		  if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
-		      (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
-		      grep IS_64BIT_ARCH >/dev/null
-		  then
-		      UNAME_PROCESSOR="x86_64"
-		  fi
-		fi ;;
-	    unknown) UNAME_PROCESSOR=powerpc ;;
-	esac
+	eval $set_cc_for_build
+	if test "$UNAME_PROCESSOR" = unknown ; then
+	    UNAME_PROCESSOR=powerpc
+	fi
+	if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then
+	    if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+		if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+		    (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		    grep IS_64BIT_ARCH >/dev/null
+		then
+		    case $UNAME_PROCESSOR in
+			i386) UNAME_PROCESSOR=x86_64 ;;
+			powerpc) UNAME_PROCESSOR=powerpc64 ;;
+		    esac
+		fi
+	    fi
+	elif test "$UNAME_PROCESSOR" = i386 ; then
+	    # Avoid executing cc on OS X 10.9, as it ships with a stub
+	    # that puts up a graphical alert prompting to install
+	    # developer tools.  Any system running Mac OS X 10.7 or
+	    # later (Darwin 11 and later) is required to have a 64-bit
+	    # processor. This is not true of the ARM version of Darwin
+	    # that Apple uses in portable devices.
+	    UNAME_PROCESSOR=x86_64
+	fi
 	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
 	exit ;;
     *:procnto*:*:* | *:QNX:[0123456789]*:*)
@@ -1230,7 +1294,10 @@ EOF
     *:QNX:*:4*)
 	echo i386-pc-qnx
 	exit ;;
-    NSE-?:NONSTOP_KERNEL:*:*)
+    NEO-?:NONSTOP_KERNEL:*:*)
+	echo neo-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSE-*:NONSTOP_KERNEL:*:*)
 	echo nse-tandem-nsk${UNAME_RELEASE}
 	exit ;;
     NSR-?:NONSTOP_KERNEL:*:*)
@@ -1275,13 +1342,13 @@ EOF
 	echo pdp10-unknown-its
 	exit ;;
     SEI:*:*:SEIUX)
-        echo mips-sei-seiux${UNAME_RELEASE}
+	echo mips-sei-seiux${UNAME_RELEASE}
 	exit ;;
     *:DragonFly:*:*)
 	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
 	exit ;;
     *:*VMS:*:*)
-    	UNAME_MACHINE=`(uname -p) 2>/dev/null`
+	UNAME_MACHINE=`(uname -p) 2>/dev/null`
 	case "${UNAME_MACHINE}" in
 	    A*) echo alpha-dec-vms ; exit ;;
 	    I*) echo ia64-dec-vms ; exit ;;
@@ -1299,11 +1366,11 @@ EOF
     i*86:AROS:*:*)
 	echo ${UNAME_MACHINE}-pc-aros
 	exit ;;
+    x86_64:VMkernel:*:*)
+	echo ${UNAME_MACHINE}-unknown-esx
+	exit ;;
 esac
 
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
 eval $set_cc_for_build
 cat >$dummy.c <<EOF
 #ifdef _SEQUENT_
@@ -1321,11 +1388,11 @@ main ()
 #include <sys/param.h>
   printf ("m68k-sony-newsos%s\n",
 #ifdef NEWSOS4
-          "4"
+	"4"
 #else
-	  ""
+	""
 #endif
-         ); exit (0);
+	); exit (0);
 #endif
 #endif
 

config.sub

@@ -1,38 +1,31 @@
 #! /bin/sh
 # Configuration validation subroutine script.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
-#   Free Software Foundation, Inc.
+#   Copyright 1992-2013 Free Software Foundation, Inc.
 
-timestamp='2009-11-20'
+timestamp='2013-10-01'
 
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine.  It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
 # (at your option) any later version.
 #
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
 
 
-# Please send patches to <config-patches@gnu.org>.  Submit a context
-# diff and a properly formatted GNU ChangeLog entry.
+# Please send patches with a ChangeLog entry to config-patches@gnu.org.
 #
 # Configuration subroutine to validate and canonicalize a configuration type.
 # Supply the specified configuration type as an argument.
@@ -75,8 +68,7 @@ Report bugs and patches to <config-patches@gnu.org>."
 version="\
 GNU config.sub ($timestamp)
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright 1992-2013 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -123,13 +115,18 @@ esac
 # Here we must recognize all the valid KERNEL-OS combinations.
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
-  nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
-  uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
+  nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
+  linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+  knetbsd*-gnu* | netbsd*-gnu* | \
   kopensolaris*-gnu* | \
   storm-chaos* | os2-emx* | rtmk-nova*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
     ;;
+  android-linux)
+    os=-linux-android
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
+    ;;
   *)
     basic_machine=`echo $1 | sed 's/-[^-]*$//'`
     if [ $basic_machine != $1 ]
@@ -152,12 +149,12 @@ case $os in
 	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
 	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
 	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple | -axis | -knuth | -cray | -microblaze)
+	-apple | -axis | -knuth | -cray | -microblaze*)
 		os=
 		basic_machine=$1
 		;;
-        -bluegene*)
-	        os=-cnk
+	-bluegene*)
+		os=-cnk
 		;;
 	-sim | -cisco | -oki | -wec | -winbond)
 		os=
@@ -173,10 +170,10 @@ case $os in
 		os=-chorusos
 		basic_machine=$1
 		;;
- 	-chorusrdb)
- 		os=-chorusrdb
+	-chorusrdb)
+		os=-chorusrdb
 		basic_machine=$1
- 		;;
+		;;
 	-hiux*)
 		os=-hiuxwe2
 		;;
@@ -221,6 +218,12 @@ case $os in
 	-isc*)
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
+	-lynx*178)
+		os=-lynxos178
+		;;
+	-lynx*5)
+		os=-lynxos5
+		;;
 	-lynx*)
 		os=-lynxos
 		;;
@@ -245,20 +248,28 @@ case $basic_machine in
 	# Some are omitted here because they have special meanings below.
 	1750a | 580 \
 	| a29k \
+	| aarch64 | aarch64_be \
 	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
 	| am33_2.0 \
-	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+	| arc | arceb \
+	| arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
+	| avr | avr32 \
+	| be32 | be64 \
 	| bfin \
-	| c4x | clipper \
+	| c4x | c8051 | clipper \
 	| d10v | d30v | dlx | dsp16xx \
+	| epiphany \
 	| fido | fr30 | frv \
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+	| hexagon \
 	| i370 | i860 | i960 | ia64 \
 	| ip2k | iq2000 \
+	| k1om \
+	| le32 | le64 \
 	| lm32 \
 	| m32c | m32r | m32rle | m68000 | m68k | m88k \
-	| maxq | mb | microblaze | mcore | mep | metag \
+	| maxq | mb | microblaze | microblazeel | mcore | mep | metag \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
@@ -276,34 +287,45 @@ case $basic_machine in
 	| mipsisa64r2 | mipsisa64r2el \
 	| mipsisa64sb1 | mipsisa64sb1el \
 	| mipsisa64sr71k | mipsisa64sr71kel \
+	| mipsr5900 | mipsr5900el \
 	| mipstx39 | mipstx39el \
 	| mn10200 | mn10300 \
 	| moxie \
 	| mt \
 	| msp430 \
-	| nios | nios2 \
+	| nds32 | nds32le | nds32be \
+	| nios | nios2 | nios2eb | nios2el \
 	| ns16k | ns32k \
-	| or32 \
+	| open8 \
+	| or1k | or32 \
 	| pdp10 | pdp11 | pj | pjl \
-	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+	| powerpc | powerpc64 | powerpc64le | powerpcle \
 	| pyramid \
-	| rx \
+	| rl78 | rx \
 	| score \
 	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
 	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
 	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
-	| spu | strongarm \
-	| tahoe | thumb | tic4x | tic80 | tron \
+	| spu \
+	| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
 	| ubicom32 \
-	| v850 | v850e \
+	| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
 	| we32k \
-	| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
+	| x86 | xc16x | xstormy16 | xtensa \
 	| z8k | z80)
 		basic_machine=$basic_machine-unknown
 		;;
-	m6811 | m68hc11 | m6812 | m68hc12 | picochip)
-		# Motorola 68HC11/12.
+	c54x)
+		basic_machine=tic54x-unknown
+		;;
+	c55x)
+		basic_machine=tic55x-unknown
+		;;
+	c6x)
+		basic_machine=tic6x-unknown
+		;;
+	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
 		basic_machine=$basic_machine-unknown
 		os=-none
 		;;
@@ -313,6 +335,21 @@ case $basic_machine in
 		basic_machine=mt-unknown
 		;;
 
+	strongarm | thumb | xscale)
+		basic_machine=arm-unknown
+		;;
+	xgate)
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	xscaleeb)
+		basic_machine=armeb-unknown
+		;;
+
+	xscaleel)
+		basic_machine=armel-unknown
+		;;
+
 	# We use `pc' rather than `unknown'
 	# because (1) that's what they normally are, and
 	# (2) the word "unknown" tends to confuse beginning users.
@@ -327,25 +364,31 @@ case $basic_machine in
 	# Recognize the basic CPU types with company name.
 	580-* \
 	| a29k-* \
+	| aarch64-* | aarch64_be-* \
 	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
 	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
-	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
 	| avr-* | avr32-* \
+	| be32-* | be64-* \
 	| bfin-* | bs2000-* \
-	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
-	| clipper-* | craynv-* | cydra-* \
+	| c[123]* | c30-* | [cjt]90-* | c4x-* \
+	| c8051-* | clipper-* | craynv-* | cydra-* \
 	| d10v-* | d30v-* | dlx-* \
 	| elxsi-* \
 	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
 	| h8300-* | h8500-* \
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+	| hexagon-* \
 	| i*86-* | i860-* | i960-* | ia64-* \
 	| ip2k-* | iq2000-* \
+	| k1om-* \
+	| le32-* | le64-* \
 	| lm32-* \
 	| m32c-* | m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
+	| microblaze-* | microblazeel-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
 	| mips16-* \
 	| mips64-* | mips64el-* \
@@ -363,29 +406,34 @@ case $basic_machine in
 	| mipsisa64r2-* | mipsisa64r2el-* \
 	| mipsisa64sb1-* | mipsisa64sb1el-* \
 	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
+	| mipsr5900-* | mipsr5900el-* \
 	| mipstx39-* | mipstx39el-* \
 	| mmix-* \
 	| mt-* \
 	| msp430-* \
-	| nios-* | nios2-* \
+	| nds32-* | nds32le-* | nds32be-* \
+	| nios-* | nios2-* | nios2eb-* | nios2el-* \
 	| none-* | np1-* | ns16k-* | ns32k-* \
+	| open8-* \
 	| orion-* \
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
-	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
+	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
 	| pyramid-* \
-	| romp-* | rs6000-* | rx-* \
+	| rl78-* | romp-* | rs6000-* | rx-* \
 	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
 	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
 	| sparclite-* \
-	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
-	| tahoe-* | thumb-* \
-	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
+	| tahoe-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tile*-* \
 	| tron-* \
 	| ubicom32-* \
-	| v850-* | v850e-* | vax-* \
+	| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
+	| vax-* \
 	| we32k-* \
-	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
+	| x86-* | x86_64-* | xc16x-* | xps100-* \
 	| xstormy16-* | xtensa*-* \
 	| ymp-* \
 	| z8k-* | z80-*)
@@ -410,7 +458,7 @@ case $basic_machine in
 		basic_machine=a29k-amd
 		os=-udi
 		;;
-    	abacus)
+	abacus)
 		basic_machine=abacus-unknown
 		;;
 	adobe68k)
@@ -480,11 +528,20 @@ case $basic_machine in
 		basic_machine=powerpc-ibm
 		os=-cnk
 		;;
+	c54x-*)
+		basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c55x-*)
+		basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c6x-*)
+		basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
 	c90)
 		basic_machine=c90-cray
 		os=-unicos
 		;;
-        cegcc)
+	cegcc)
 		basic_machine=arm-unknown
 		os=-cegcc
 		;;
@@ -516,7 +573,7 @@ case $basic_machine in
 		basic_machine=craynv-cray
 		os=-unicosmp
 		;;
-	cr16)
+	cr16 | cr16-*)
 		basic_machine=cr16-unknown
 		os=-elf
 		;;
@@ -674,7 +731,6 @@ case $basic_machine in
 	i370-ibm* | ibm*)
 		basic_machine=i370-ibm
 		;;
-# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
 	i*86v32)
 		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
 		os=-sysv32
@@ -732,11 +788,15 @@ case $basic_machine in
 		basic_machine=ns32k-utek
 		os=-sysv
 		;;
-        microblaze)
+	microblaze*)
 		basic_machine=microblaze-xilinx
 		;;
+	mingw64)
+		basic_machine=x86_64-pc
+		os=-mingw64
+		;;
 	mingw32)
-		basic_machine=i386-pc
+		basic_machine=i686-pc
 		os=-mingw32
 		;;
 	mingw32ce)
@@ -771,10 +831,18 @@ case $basic_machine in
 	ms1-*)
 		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
 		;;
+	msys)
+		basic_machine=i686-pc
+		os=-msys
+		;;
 	mvs)
 		basic_machine=i370-ibm
 		os=-mvs
 		;;
+	nacl)
+		basic_machine=le32-unknown
+		os=-nacl
+		;;
 	ncr3000)
 		basic_machine=i486-ncr
 		os=-sysv4
@@ -839,6 +907,12 @@ case $basic_machine in
 	np1)
 		basic_machine=np1-gould
 		;;
+	neo-tandem)
+		basic_machine=neo-tandem
+		;;
+	nse-tandem)
+		basic_machine=nse-tandem
+		;;
 	nsr-tandem)
 		basic_machine=nsr-tandem
 		;;
@@ -921,9 +995,10 @@ case $basic_machine in
 		;;
 	power)	basic_machine=power-ibm
 		;;
-	ppc)	basic_machine=powerpc-unknown
+	ppc | ppcbe)	basic_machine=powerpc-unknown
 		;;
-	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+	ppc-* | ppcbe-*)
+		basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
 	ppcle | powerpclittle | ppc-le | powerpc-little)
 		basic_machine=powerpcle-unknown
@@ -948,7 +1023,11 @@ case $basic_machine in
 		basic_machine=i586-unknown
 		os=-pw32
 		;;
-	rdos)
+	rdos | rdos64)
+		basic_machine=x86_64-pc
+		os=-rdos
+		;;
+	rdos32)
 		basic_machine=i386-pc
 		os=-rdos
 		;;
@@ -1017,6 +1096,9 @@ case $basic_machine in
 		basic_machine=i860-stratus
 		os=-sysv4
 		;;
+	strongarm-* | thumb-*)
+		basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
 	sun2)
 		basic_machine=m68000-sun
 		;;
@@ -1073,20 +1155,8 @@ case $basic_machine in
 		basic_machine=t90-cray
 		os=-unicos
 		;;
-	tic54x | c54x*)
-		basic_machine=tic54x-unknown
-		os=-coff
-		;;
-	tic55x | c55x*)
-		basic_machine=tic55x-unknown
-		os=-coff
-		;;
-	tic6x | c6x*)
-		basic_machine=tic6x-unknown
-		os=-coff
-		;;
 	tile*)
-		basic_machine=tile-unknown
+		basic_machine=$basic_machine-unknown
 		os=-linux-gnu
 		;;
 	tx39)
@@ -1156,6 +1226,9 @@ case $basic_machine in
 	xps | xps100)
 		basic_machine=xps100-honeywell
 		;;
+	xscale-* | xscalee[bl]-*)
+		basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
+		;;
 	ymp)
 		basic_machine=ymp-cray
 		os=-unicos
@@ -1253,11 +1326,11 @@ esac
 if [ x"$os" != x"" ]
 then
 case $os in
-        # First match some system type aliases
-        # that might get confused with valid system types.
+	# First match some system type aliases
+	# that might get confused with valid system types.
 	# -solaris* is a basic system type, with this one exception.
-        -auroraux)
-	        os=-auroraux
+	-auroraux)
+		os=-auroraux
 		;;
 	-solaris1 | -solaris1.*)
 		os=`echo $os | sed -e 's|solaris1|sunos4|'`
@@ -1281,20 +1354,21 @@ case $os in
 	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
 	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
 	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
-	      | -sym* | -kopensolaris* \
+	      | -sym* | -kopensolaris* | -plan9* \
 	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
 	      | -aos* | -aros* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
 	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
-	      | -openbsd* | -solidbsd* \
+	      | -bitrig* | -openbsd* | -solidbsd* \
 	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
 	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
 	      | -chorusos* | -chorusrdb* | -cegcc* \
-	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
+	      | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
+	      | -linux-newlib* | -linux-musl* | -linux-uclibc* \
 	      | -uxpv* | -beos* | -mpeix* | -udk* \
 	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
@@ -1341,7 +1415,7 @@ case $os in
 	-opened*)
 		os=-openedition
 		;;
-        -os400*)
+	-os400*)
 		os=-os400
 		;;
 	-wince*)
@@ -1390,7 +1464,7 @@ case $os in
 	-sinix*)
 		os=-sysv4
 		;;
-        -tpf*)
+	-tpf*)
 		os=-tpf
 		;;
 	-triton*)
@@ -1426,15 +1500,14 @@ case $os in
 	-aros*)
 		os=-aros
 		;;
-	-kaos*)
-		os=-kaos
-		;;
 	-zvmoe)
 		os=-zvmoe
 		;;
 	-dicos*)
 		os=-dicos
 		;;
+	-nacl*)
+		;;
 	-none)
 		;;
 	*)
@@ -1457,10 +1530,10 @@ else
 # system, and we'll never get to this point.
 
 case $basic_machine in
-        score-*)
+	score-*)
 		os=-elf
 		;;
-        spu-*)
+	spu-*)
 		os=-elf
 		;;
 	*-acorn)
@@ -1472,8 +1545,23 @@ case $basic_machine in
 	arm*-semi)
 		os=-aout
 		;;
-        c4x-* | tic4x-*)
-        	os=-coff
+	c4x-* | tic4x-*)
+		os=-coff
+		;;
+	c8051-*)
+		os=-elf
+		;;
+	hexagon-*)
+		os=-elf
+		;;
+	tic54x-*)
+		os=-coff
+		;;
+	tic55x-*)
+		os=-coff
+		;;
+	tic6x-*)
+		os=-coff
 		;;
 	# This must come before the *-dec entry.
 	pdp10-*)
@@ -1493,14 +1581,11 @@ case $basic_machine in
 		;;
 	m68000-sun)
 		os=-sunos3
-		# This also exists in the configure program, but was not the
-		# default.
-		# os=-sunos4
 		;;
 	m68*-cisco)
 		os=-aout
 		;;
-        mep-*)
+	mep-*)
 		os=-elf
 		;;
 	mips*-cisco)
@@ -1509,6 +1594,9 @@ case $basic_machine in
 	mips*-*)
 		os=-elf
 		;;
+	or1k-*)
+		os=-elf
+		;;
 	or32-*)
 		os=-coff
 		;;
@@ -1527,7 +1615,7 @@ case $basic_machine in
 	*-ibm)
 		os=-aix
 		;;
-    	*-knuth)
+	*-knuth)
 		os=-mmixware
 		;;
 	*-wec)

configure.ac

@@ -16,14 +16,14 @@ dnl should not be necessary to regenerate configure if the time
 dnl stamps are correct
 AC_PREREQ(2.59)
 
-AC_INIT([libpng], [1.4.13beta02], [png-mng-implement@lists.sourceforge.net])
+AC_INIT([libpng], [1.4.13], [png-mng-implement@lists.sourceforge.net])
 AM_INIT_AUTOMAKE
 dnl stop configure from automagically running automake
 AM_MAINTAINER_MODE
 
 dnl Version number stuff here:
 
-PNGLIB_VERSION=1.4.13beta02
+PNGLIB_VERSION=1.4.13
 PNGLIB_MAJOR=1
 PNGLIB_MINOR=4
 PNGLIB_RELEASE=13

contrib/gregbook/readpng.c

@@ -214,6 +214,10 @@ uch *readpng_get_image(double display_exponent, int *pChannels, ulg *pRowbytes)
      * libpng function */
 
     if (setjmp(png_jmpbuf(png_ptr))) {
+        free(image_data);
+        image_data = NULL;
+        free(row_pointers);
+        row_pointers = NULL;
         png_destroy_read_struct(&png_ptr, &info_ptr, NULL);
         return NULL;
     }

depcomp

@@ -1,10 +1,9 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2009-04-28.21; # UTC
+scriptversion=2013-05-30.07; # UTC
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
-# Software Foundation, Inc.
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -28,9 +27,9 @@ scriptversion=2009-04-28.21; # UTC
 
 case $1 in
   '')
-     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
+    echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+    exit 1;
+    ;;
   -h | --h*)
     cat <<\EOF
 Usage: depcomp [--help] [--version] PROGRAM [ARGS]
@@ -40,11 +39,11 @@ as side-effects.
 
 Environment variables:
   depmode     Dependency tracking mode.
-  source      Source file read by `PROGRAMS ARGS'.
-  object      Object file output by `PROGRAMS ARGS'.
+  source      Source file read by 'PROGRAMS ARGS'.
+  object      Object file output by 'PROGRAMS ARGS'.
   DEPDIR      directory where to store dependencies.
   depfile     Dependency file to output.
-  tmpdepfile  Temporary file to use when outputing dependencies.
+  tmpdepfile  Temporary file to use when outputting dependencies.
   libtool     Whether libtool is used (yes/no).
 
 Report bugs to <bug-automake@gnu.org>.
@@ -57,6 +56,66 @@ EOF
     ;;
 esac
 
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'.  Note that this directory component will
+# be either empty or ending with a '/' character.  This is deliberate.
+set_dir_from ()
+{
+  case $1 in
+    */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+      *) dir=;;
+  esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+  base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+  echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+  # If the compiler actually managed to produce a dependency file,
+  # post-process it.
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form 'foo.o: dependency.h'.
+    # Do two passes, one to just change these to
+    #   $object: dependency.h
+    # and one to simply output
+    #   dependency.h:
+    # which is needed to avoid the deleted-header problem.
+    { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+      sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+    } > "$depfile"
+    rm -f "$tmpdepfile"
+  else
+    make_dummy_depfile
+  fi
+}
+
+# A tabulation character.
+tab='	'
+# A newline character.
+nl='
+'
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
+
 if test -z "$depmode" || test -z "$source" || test -z "$object"; then
   echo "depcomp: Variables source, object and depmode must be set" 1>&2
   exit 1
@@ -69,6 +128,9 @@ tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
 
 rm -f "$tmpdepfile"
 
+# Avoid interferences from the environment.
+gccflag= dashmflag=
+
 # Some modes work just like other modes, but use different flags.  We
 # parameterize here, but still list the modes in the big case below,
 # to make depend.m4 easier to write.  Note that we *cannot* use a case
@@ -80,18 +142,32 @@ if test "$depmode" = hp; then
 fi
 
 if test "$depmode" = dashXmstdout; then
-   # This is just like dashmstdout with a different argument.
-   dashmflag=-xM
-   depmode=dashmstdout
+  # This is just like dashmstdout with a different argument.
+  dashmflag=-xM
+  depmode=dashmstdout
 fi
 
 cygpath_u="cygpath -u -f -"
 if test "$depmode" = msvcmsys; then
-   # This is just like msvisualcpp but w/o cygpath translation.
-   # Just convert the backslash-escaped backslashes to single forward
-   # slashes to satisfy depend.m4
-   cygpath_u="sed s,\\\\\\\\,/,g"
-   depmode=msvisualcpp
+  # This is just like msvisualcpp but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvisualcpp
+fi
+
+if test "$depmode" = msvc7msys; then
+  # This is just like msvc7 but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvc7
+fi
+
+if test "$depmode" = xlc; then
+  # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
+  gccflag=-qmakedep=gcc,-MF
+  depmode=gcc
 fi
 
 case "$depmode" in
@@ -114,8 +190,7 @@ gcc3)
   done
   "$@"
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -123,13 +198,17 @@ gcc3)
   ;;
 
 gcc)
+## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
+## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
+## (see the conditional assignment to $gccflag above).
 ## There are various ways to get dependency output from gcc.  Here's
 ## why we pick this rather obscure method:
 ## - Don't want to use -MD because we'd like the dependencies to end
 ##   up in a subdir.  Having to rename by hand is ugly.
 ##   (We might end up doing this anyway to support other compilers.)
 ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
+##   -MM, not -M (despite what the docs say).  Also, it might not be
+##   supported by the other compilers which use the 'gcc' depmode.
 ## - Using -M directly means running the compiler twice (even worse
 ##   than renaming).
   if test -z "$gccflag"; then
@@ -137,31 +216,31 @@ gcc)
   fi
   "$@" -Wp,"$gccflag$tmpdepfile"
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
+  # The second -e expression handles DOS-style file names with drive
+  # letters.
   sed -e 's/^[^:]*: / /' \
       -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
+## This next piece of magic avoids the "deleted header file" problem.
 ## The problem is that when a header file which appears in a .P file
 ## is deleted, the dependency causes make to die (because there is
 ## typically no way to rebuild the header).  We avoid this by adding
 ## dummy dependencies for each header file.  Too bad gcc doesn't do
 ## this for us directly.
-  tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'.  On the theory
+## Some versions of gcc put a space before the ':'.  On the theory
 ## that the space means something, we add a space to the output as
-## well.
+## well.  hp depmode also adds that space, but also prefixes the VPATH
+## to the object.  Take care to not repeat it in the output.
 ## Some versions of the HPUX 10.20 sed can't process this invocation
 ## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
@@ -179,8 +258,7 @@ sgi)
     "$@" -MDupdate "$tmpdepfile"
   fi
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -188,43 +266,41 @@ sgi)
 
   if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
     echo "$object : \\" > "$depfile"
-
     # Clip off the initial element (the dependent).  Don't try to be
     # clever and replace this with sed code, as IRIX sed won't handle
     # lines with more than a fixed number of characters (4096 in
     # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
-    # the IRIX cc adds comments like `#:fec' to the end of the
+    # the IRIX cc adds comments like '#:fec' to the end of the
     # dependency line.
-    tr ' ' '
-' < "$tmpdepfile" \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
-    tr '
-' ' ' >> "$depfile"
+    tr ' ' "$nl" < "$tmpdepfile" \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
+      | tr "$nl" ' ' >> "$depfile"
     echo >> "$depfile"
-
     # The second pass generates a dummy entry for each header file.
-    tr ' ' '
-' < "$tmpdepfile" \
-   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> "$depfile"
+    tr ' ' "$nl" < "$tmpdepfile" \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+      >> "$depfile"
   else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
+    make_dummy_depfile
   fi
   rm -f "$tmpdepfile"
   ;;
 
+xlc)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
 aix)
   # The C for AIX Compiler uses -M and outputs the dependencies
   # in a .u file.  In older versions, this file always lives in the
-  # current directory.  Also, the AIX compiler puts `$object:' at the
+  # current directory.  Also, the AIX compiler puts '$object:' at the
   # start of each line; $object doesn't have directory information.
   # Version 6 uses the directory in both cases.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  set_dir_from "$object"
+  set_base_from "$object"
   if test "$libtool" = yes; then
     tmpdepfile1=$dir$base.u
     tmpdepfile2=$base.u
@@ -237,9 +313,7 @@ aix)
     "$@" -M
   fi
   stat=$?
-
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
     exit $stat
   fi
@@ -248,44 +322,100 @@ aix)
   do
     test -f "$tmpdepfile" && break
   done
-  if test -f "$tmpdepfile"; then
-    # Each line is of the form `foo.o: dependent.h'.
-    # Do two passes, one to just change these to
-    # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-    # That's a tab and a space in the [].
-    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
+  aix_post_process_depfile
+  ;;
+
+tcc)
+  # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+  # FIXME: That version still under development at the moment of writing.
+  #        Make that this statement remains true also for stable, released
+  #        versions.
+  # It will wrap lines (doesn't matter whether long or short) with a
+  # trailing '\', as in:
+  #
+  #   foo.o : \
+  #    foo.c \
+  #    foo.h \
+  #
+  # It will put a trailing '\' even on the last line, and will use leading
+  # spaces rather than leading tabs (at least since its commit 0394caf7
+  # "Emit spaces for -MD").
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
   fi
+  rm -f "$depfile"
+  # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+  # We have to change lines of the first kind to '$object: \'.
+  sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+  # And for each line of the second kind, we have to emit a 'dep.h:'
+  # dummy dependency, to avoid the deleted-header problem.
+  sed -n -e 's|^  *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
-icc)
-  # Intel's C compiler understands `-MD -MF file'.  However on
-  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
-  # ICC 7.0 will fill foo.d with something like
-  #    foo.o: sub/foo.c
-  #    foo.o: sub/foo.h
-  # which is wrong.  We want:
-  #    sub/foo.o: sub/foo.c
-  #    sub/foo.o: sub/foo.h
-  #    sub/foo.c:
-  #    sub/foo.h:
-  # ICC 7.1 will output
+## The order of this option in the case statement is important, since the
+## shell code in configure will try each of these formats in the order
+## listed in this file.  A plain '-MD' option would be understood by many
+## compilers, so we must ensure this comes after the gcc and icc options.
+pgcc)
+  # Portland's C compiler understands '-MD'.
+  # Will always output deps to 'file.d' where file is the root name of the
+  # source file under compilation, even if file resides in a subdirectory.
+  # The object file name does not affect the name of the '.d' file.
+  # pgcc 10.2 will output
   #    foo.o: sub/foo.c sub/foo.h
-  # and will wrap long lines using \ :
+  # and will wrap long lines using '\' :
   #    foo.o: sub/foo.c ... \
   #     sub/foo.h ... \
   #     ...
+  set_dir_from "$object"
+  # Use the source, not the object, to determine the base name, since
+  # that's sadly what pgcc will do too.
+  set_base_from "$source"
+  tmpdepfile=$base.d
 
-  "$@" -MD -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
+  # For projects that build the same source file twice into different object
+  # files, the pgcc approach of using the *source* file root name can cause
+  # problems in parallel builds.  Use a locking strategy to avoid stomping on
+  # the same $tmpdepfile.
+  lockdir=$base.d-lock
+  trap "
+    echo '$0: caught signal, cleaning up...' >&2
+    rmdir '$lockdir'
+    exit 1
+  " 1 2 13 15
+  numtries=100
+  i=$numtries
+  while test $i -gt 0; do
+    # mkdir is a portable test-and-set.
+    if mkdir "$lockdir" 2>/dev/null; then
+      # This process acquired the lock.
+      "$@" -MD
+      stat=$?
+      # Release the lock.
+      rmdir "$lockdir"
+      break
+    else
+      # If the lock is being held by a different process, wait
+      # until the winning process is done or we timeout.
+      while test -d "$lockdir" && test $i -gt 0; do
+        sleep 1
+        i=`expr $i - 1`
+      done
+    fi
+    i=`expr $i - 1`
+  done
+  trap - 1 2 13 15
+  if test $i -le 0; then
+    echo "$0: failed to acquire lock after $numtries attempts" >&2
+    echo "$0: check lockdir '$lockdir'" >&2
+    exit 1
+  fi
+
+  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -297,8 +427,8 @@ icc)
   sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
   # Some versions of the HPUX 10.20 sed can't process this invocation
   # correctly.  Breaking it into two sed invocations is a workaround.
-  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
-    sed -e 's/$/ :/' >> "$depfile"
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
@@ -309,9 +439,8 @@ hp2)
   # 'foo.d', which lands next to the object file, wherever that
   # happens to be.
   # Much of this is similar to the tru64 case; see comments there.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  set_dir_from  "$object"
+  set_base_from "$object"
   if test "$libtool" = yes; then
     tmpdepfile1=$dir$base.d
     tmpdepfile2=$dir.libs/$base.d
@@ -322,8 +451,7 @@ hp2)
     "$@" +Maked
   fi
   stat=$?
-  if test $stat -eq 0; then :
-  else
+  if test $stat -ne 0; then
      rm -f "$tmpdepfile1" "$tmpdepfile2"
      exit $stat
   fi
@@ -333,77 +461,107 @@ hp2)
     test -f "$tmpdepfile" && break
   done
   if test -f "$tmpdepfile"; then
-    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
-    # Add `dependent.h:' lines.
+    sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
+    # Add 'dependent.h:' lines.
     sed -ne '2,${
-	       s/^ *//
-	       s/ \\*$//
-	       s/$/:/
-	       p
-	     }' "$tmpdepfile" >> "$depfile"
+               s/^ *//
+               s/ \\*$//
+               s/$/:/
+               p
+             }' "$tmpdepfile" >> "$depfile"
   else
-    echo "#dummy" > "$depfile"
+    make_dummy_depfile
   fi
   rm -f "$tmpdepfile" "$tmpdepfile2"
   ;;
 
 tru64)
-   # The Tru64 compiler uses -MD to generate dependencies as a side
-   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
-   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-   # dependencies in `foo.d' instead, so we check for that too.
-   # Subdirectories are respected.
-   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-   test "x$dir" = "x$object" && dir=
-   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  # The Tru64 compiler uses -MD to generate dependencies as a side
+  # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+  # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+  # dependencies in 'foo.d' instead, so we check for that too.
+  # Subdirectories are respected.
+  set_dir_from  "$object"
+  set_base_from "$object"
 
-   if test "$libtool" = yes; then
-      # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mechanism is used in libtool 1.4 series to
-      # handle both shared and static libraries in a single compilation.
-      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
-      #
-      # With libtool 1.5 this exception was removed, and libtool now
-      # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in $dir.libs/$base.o.d and
-      # in $dir$base.o.d.  We have to check for both files, because
-      # one of the two compilations can be disabled.  We should prefer
-      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
-      # automatically cleaned when .libs/ is deleted, while ignoring
-      # the former would cause a distcleancheck panic.
-      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
-      tmpdepfile2=$dir$base.o.d          # libtool 1.5
-      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
-      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
-      "$@" -Wc,-MD
-   else
-      tmpdepfile1=$dir$base.o.d
-      tmpdepfile2=$dir$base.d
-      tmpdepfile3=$dir$base.d
-      tmpdepfile4=$dir$base.d
-      "$@" -MD
-   fi
+  if test "$libtool" = yes; then
+    # Libtool generates 2 separate objects for the 2 libraries.  These
+    # two compilations output dependencies in $dir.libs/$base.o.d and
+    # in $dir$base.o.d.  We have to check for both files, because
+    # one of the two compilations can be disabled.  We should prefer
+    # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+    # automatically cleaned when .libs/ is deleted, while ignoring
+    # the former would cause a distcleancheck panic.
+    tmpdepfile1=$dir$base.o.d          # libtool 1.5
+    tmpdepfile2=$dir.libs/$base.o.d    # Likewise.
+    tmpdepfile3=$dir.libs/$base.d      # Compaq CCC V6.2-504
+    "$@" -Wc,-MD
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    tmpdepfile3=$dir$base.d
+    "$@" -MD
+  fi
 
-   stat=$?
-   if test $stat -eq 0; then :
-   else
-      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-      exit $stat
-   fi
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
 
-   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-   do
-     test -f "$tmpdepfile" && break
-   done
-   if test -f "$tmpdepfile"; then
-      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-      # That's a tab and a space in the [].
-      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
-   ;;
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  # Same post-processing that is required for AIX mode.
+  aix_post_process_depfile
+  ;;
+
+msvc7)
+  if test "$libtool" = yes; then
+    showIncludes=-Wc,-showIncludes
+  else
+    showIncludes=-showIncludes
+  fi
+  "$@" $showIncludes > "$tmpdepfile"
+  stat=$?
+  grep -v '^Note: including file: ' "$tmpdepfile"
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  # The first sed program below extracts the file names and escapes
+  # backslashes for cygpath.  The second sed program outputs the file
+  # name when reading, but also accumulates all include files in the
+  # hold buffer in order to output them again at the end.  This only
+  # works with sed implementations that can handle large buffers.
+  sed < "$tmpdepfile" -n '
+/^Note: including file:  *\(.*\)/ {
+  s//\1/
+  s/\\/\\\\/g
+  p
+}' | $cygpath_u | sort -u | sed -n '
+s/ /\\ /g
+s/\(.*\)/'"$tab"'\1 \\/p
+s/.\(.*\) \\/\1:/
+H
+$ {
+  s/.*/'"$tab"'/
+  G
+  p
+}' >> "$depfile"
+  echo >> "$depfile" # make sure the fragment doesn't end with a backslash
+  rm -f "$tmpdepfile"
+  ;;
+
+msvc7msys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
 
 #nosideeffect)
   # This comment above is used by automake to tell side-effect
@@ -422,7 +580,7 @@ dashmstdout)
     shift
   fi
 
-  # Remove `-o $object'.
+  # Remove '-o $object'.
   IFS=" "
   for arg
   do
@@ -442,18 +600,18 @@ dashmstdout)
   done
 
   test -z "$dashmflag" && dashmflag=-M
-  # Require at least two characters before searching for `:'
+  # Require at least two characters before searching for ':'
   # in the target name.  This is to cope with DOS-style filenames:
-  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+  # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
   "$@" $dashmflag |
-    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
+    sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
   rm -f "$depfile"
   cat < "$tmpdepfile" > "$depfile"
-  tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this sed invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
@@ -503,12 +661,15 @@ makedepend)
   touch "$tmpdepfile"
   ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
   rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  # makedepend may prepend the VPATH from the source file name to the object.
+  # No need to regex-escape $object, excess matching of '.' is harmless.
+  sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process the last invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed '1,2d' "$tmpdepfile" \
+    | tr ' ' "$nl" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile" "$tmpdepfile".bak
   ;;
 
@@ -525,7 +686,7 @@ cpp)
     shift
   fi
 
-  # Remove `-o $object'.
+  # Remove '-o $object'.
   IFS=" "
   for arg
   do
@@ -544,10 +705,10 @@ cpp)
     esac
   done
 
-  "$@" -E |
-    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-    sed '$ s: \\$::' > "$tmpdepfile"
+  "$@" -E \
+    | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+             -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+    | sed '$ s: \\$::' > "$tmpdepfile"
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
   cat < "$tmpdepfile" >> "$depfile"
@@ -579,23 +740,23 @@ msvisualcpp)
       shift
       ;;
     "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
-	set fnord "$@"
-	shift
-	shift
-	;;
+        set fnord "$@"
+        shift
+        shift
+        ;;
     *)
-	set fnord "$@" "$arg"
-	shift
-	shift
-	;;
+        set fnord "$@" "$arg"
+        shift
+        shift
+        ;;
     esac
   done
   "$@" -E 2>/dev/null |
   sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
-  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
-  echo "	" >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
+  echo "$tab" >> "$depfile"
   sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;

install-sh

@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2009-04-28.21; # UTC
+scriptversion=2011-11-20.07; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -35,7 +35,7 @@ scriptversion=2009-04-28.21; # UTC
 # FSF changes to this file are in the public domain.
 #
 # Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
+# 'make' implicit rules from creating a file called install from it
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
@@ -156,6 +156,10 @@ while test $# -ne 0; do
     -s) stripcmd=$stripprog;;
 
     -t) dst_arg=$2
+	# Protect names problematic for 'test' and other utilities.
+	case $dst_arg in
+	  -* | [=\(\)!]) dst_arg=./$dst_arg;;
+	esac
 	shift;;
 
     -T) no_target_directory=true;;
@@ -186,6 +190,10 @@ if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
     fi
     shift # arg
     dst_arg=$arg
+    # Protect names problematic for 'test' and other utilities.
+    case $dst_arg in
+      -* | [=\(\)!]) dst_arg=./$dst_arg;;
+    esac
   done
 fi
 
@@ -194,13 +202,17 @@ if test $# -eq 0; then
     echo "$0: no input file specified." >&2
     exit 1
   fi
-  # It's OK to call `install-sh -d' without argument.
+  # It's OK to call 'install-sh -d' without argument.
   # This can happen when creating conditional directories.
   exit 0
 fi
 
 if test -z "$dir_arg"; then
-  trap '(exit $?); exit' 1 2 13 15
+  do_exit='(exit $ret); exit $ret'
+  trap "ret=129; $do_exit" 1
+  trap "ret=130; $do_exit" 2
+  trap "ret=141; $do_exit" 13
+  trap "ret=143; $do_exit" 15
 
   # Set umask so as not to create temps with too-generous modes.
   # However, 'strip' requires both read and write access to temps.
@@ -228,9 +240,9 @@ fi
 
 for src
 do
-  # Protect names starting with `-'.
+  # Protect names problematic for 'test' and other utilities.
   case $src in
-    -*) src=./$src;;
+    -* | [=\(\)!]) src=./$src;;
   esac
 
   if test -n "$dir_arg"; then
@@ -252,12 +264,7 @@ do
       echo "$0: no destination specified." >&2
       exit 1
     fi
-
     dst=$dst_arg
-    # Protect names starting with `-'.
-    case $dst in
-      -*) dst=./$dst;;
-    esac
 
     # If destination is a directory, append the input filename; won't work
     # if double slashes aren't ignored.
@@ -347,7 +354,7 @@ do
 	      if test -z "$dir_arg" || {
 		   # Check for POSIX incompatibilities with -m.
 		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writeable bit of parent directory when it shouldn't.
+		   # other-writable bit of parent directory when it shouldn't.
 		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
 		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
 		   case $ls_ld_tmpdir in
@@ -385,7 +392,7 @@ do
 
       case $dstdir in
 	/*) prefix='/';;
-	-*) prefix='./';;
+	[-=\(\)!]*) prefix='./';;
 	*)  prefix='';;
       esac
 
@@ -403,7 +410,7 @@ do
 
       for d
       do
-	test -z "$d" && continue
+	test X"$d" = X && continue
 
 	prefix=$prefix$d
 	if test -d "$prefix"; then

libpng-1.4.13.txt

@@ -1,9 +1,9 @@
 libpng.txt - A description on how to use and modify libpng
 
- libpng version 1.4.13beta02 - January 22, 2013
+ libpng version 1.4.13 - February 6, 2014
  Updated and distributed by Glenn Randers-Pehrson
  <glennrp at users.sourceforge.net>
- Copyright (c) 1998-2013 Glenn Randers-Pehrson
+ Copyright (c) 1998-2014 Glenn Randers-Pehrson
 
  This document is released under the libpng license.
  For conditions of distribution and use, see the disclaimer
@@ -11,9 +11,9 @@ libpng.txt - A description on how to use and modify libpng
 
  Based on:
 
- libpng versions 0.97, January 1998, through 1.4.13beta02 - January 22, 2013
+ libpng versions 0.97, January 1998, through 1.4.13 - February 6, 2014
  Updated and distributed by Glenn Randers-Pehrson
- Copyright (c) 1998-2010 Glenn Randers-Pehrson
+ Copyright (c) 1998-2014 Glenn Randers-Pehrson
 
  libpng 1.0 beta 6  version 0.96 May 28, 1997
  Updated and distributed by Andreas Dilger
@@ -906,7 +906,7 @@ things.
 As of libpng version 1.2.9, png_set_expand_gray_1_2_4_to_8() was
 added.  It expands the sample depth without changing tRNS to alpha.
 
-As of libpng version 1.4.13beta02, not all possible expansions are supported.
+As of libpng version 1.4.13, not all possible expansions are supported.
 
 In the following table, the 01 means grayscale with depth<8, 31 means
 indexed with depth<8, other numerals represent the color type, "T" means
@@ -2877,7 +2877,7 @@ the message, "message" is the formatted string to be printed,
 and p1 and p2 are parameters that are to be embedded in the string
 according to printf-style formatting directives.  For example,
 
-   png_debug1(2, "foo=%d\n", foo);
+   png_debug1(2, "foo=%d", foo);
 
 is expanded to
 
@@ -2955,6 +2955,9 @@ png_set_error_fn(), which is essentially the same function, but with a new
 name to force compilation errors with applications that try to use the old
 method.
 
+Support for the sCAL, iCCP, iTXt, and sPLT chunks was added at libpng-1.0.6;
+however, iTXt support was not enabled by default.
+
 Starting with version 1.0.7, you can find out which version of the library
 you are using at run-time:
 
@@ -3166,7 +3169,7 @@ it has not been well tested and doesn't actually "dither".
 The code was not
 removed, however, and could be enabled by building libpng with
 PNG_READ_DITHER_SUPPORTED defined.  In libpng-1.4.2, this support
-was reenabled, but the function was renamed png_set_quantize() to
+was re-enabled, but the function was renamed png_set_quantize() to
 reflect more accurately what it actually does.  At the same time,
 the PNG_DITHER_[RED,GREEN_BLUE]_BITS macros were also renamed to
 PNG_QUANTIZE_[RED,GREEN,BLUE]_BITS.
@@ -3189,11 +3192,11 @@ control.  The git repository was built from old libpng-x.y.z.tar.gz files
 going back to version 0.70.  You can access the git repository (read only)
 at
 
-    git://libpng.git.sourceforge.net/gitroot/libpng
+    git://git.code.sf.net/p/libpng/code
 
-or you can browse it via "gitweb" at
+or you can browse it with a web browser by selecting the "code" button at
 
-    http://libpng.git.sourceforge.net/git/gitweb.cgi?p=libpng
+    https://sourceforge.net/projects/libpng/
 
 Patches can be sent to glennrp at users.sourceforge.net or to
 png-mng-implement at lists.sourceforge.net or you can upload them to
@@ -3312,13 +3315,13 @@ Other rules can be inferred by inspecting the libpng source.
 
 XIII. Y2K Compliance in libpng
 
-January 22, 2013
+February 6, 2014
 
 Since the PNG Development group is an ad-hoc body, we can't make
 an official declaration.
 
 This is your unofficial assurance that libpng from version 0.71 and
-upward through 1.4.13beta02 are Y2K compliant.  It is my belief that earlier
+upward through 1.4.13 are Y2K compliant.  It is my belief that earlier
 versions were also Y2K compliant.
 
 Libpng only has three year fields.  One is a 2-byte unsigned integer that

libpngpf.3

@@ -1,794 +1,283 @@
-.TH LIBPNGPF 3 "January 22, 2013"
+.TH LIBPNGPF 3 "February 6, 2014"
 .SH NAME
-libpng \- Portable Network Graphics (PNG) Reference Library 1.4.13beta02
+libpng \- Portable Network Graphics (PNG) Reference Library 1.4.13
 (private functions)
 .SH SYNOPSIS
-\fB#include <png.h>\fP
+\fB#include <png.h>
+#include "pngpriv.h"\fP
 
-\fB#include \fI"pngpriv.h"
-
-\fI\fB
-
-\fBvoid png_64bit_product (long \fP\fIv1\fP\fB, long \fP\fIv2\fP\fB, unsigned long \fI*hi_product,
-
-\fBunsigned long \fI*lo_product\fP\fB);\fP
-
-\fI\fB
+\fBvoid png_64bit_product (long \fP\fIv1\fP\fB, long \fP\fIv2\fP\fB, unsigned long \fP\fI*hi_product\fP\fB, unsigned long \fI*lo_product\fP\fB);\fP
 
 \fBvoid png_build_gamma_table (png_structp \fP\fIpng_ptr\fP\fB, png_byte \fIbit_depth\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_build_grayscale_palette (int \fP\fIbit_depth\fP\fB, png_colorp \fIpalette\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_calculate_crc (png_structp \fP\fIpng_ptr\fP\fB, png_bytep \fP\fIptr\fP\fB, png_size_t \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBint png_check_cHRM_fixed (png_structp \fP\fIpng_ptr\fP\fB, png_fixed_point \fP\fIint_white_x\fP\fB, png_fixed_point \fP\fIint_white_y\fP\fB, png_fixed_point \fP\fIint_red_x\fP\fB, png_fixed_point \fP\fIint_red_y\fP\fB, png_fixed_point \fP\fIint_green_x\fP\fB, png_fixed_point \fP\fIint_green_y\fP\fB, png_fixed_point \fP\fIint_blue_x\fP\fB, png_fixed_point \fIint_blue_y\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_check_chunk_name (png_structp \fP\fIpng_ptr\fP\fB, png_bytep \fIchunk_name\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBpng_size_t png_check_keyword (png_structp \fP\fIpng_ptr\fP\fB, png_charp \fP\fIkey\fP\fB, png_charpp \fInew_key\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_check_IHDR (png_structp \fP\fIpng_ptr\fP\fB, png_uint_32 \fP\fIwidth\fP\fB, png_uint_32 \fP\fIheight\fP\fB, int \fP\fIbit_depth\fP\fB, int \fP\fIcolor_type\fP\fB, int \fP\fIinterlace_type\fP\fB, int \fP\fIcompression_type\fP\fB, int \fIfilter_type\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_combine_row (png_structp \fP\fIpng_ptr\fP\fB, png_bytep \fP\fIrow\fP\fB, int \fImask\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_correct_palette (png_structp \fP\fIpng_ptr\fP\fB, png_colorp \fP\fIpalette\fP\fB, int \fInum_palette\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBint png_crc_error (png_structp \fIpng_ptr\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBint png_crc_finish (png_structp \fP\fIpng_ptr\fP\fB, png_uint_32 \fIskip\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_crc_read (png_structp \fP\fIpng_ptr\fP\fB, png_bytep \fP\fIbuf\fP\fB, png_size_t \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBpng_voidp png_create_struct (int \fItype\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBpng_voidp png_create_struct_2 (int \fP\fItype\fP\fB, png_malloc_ptr \fP\fImalloc_fn\fP\fB, png_voidp \fImem_ptr\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBint png_debug(int \fP\fIlevel\fP\fB, png_const_charp \fImessage\fP\fB);\fP
 
-\fI\fB
-
 \fBint png_debug1(int \fP\fIlevel\fP\fB, png_const_charp \fP\fImessage\fP\fB, \fIp1\fP\fB);\fP
 
-\fI\fB
-
 \fBint png_debug2(int \fP\fIlevel\fP\fB, png_const_charp \fP\fImessage\fP\fB, \fP\fIp1\fP\fB, \fIp2\fP\fB);\fP
 
-\fI\fB
-
 \fBvoid png_decompress_chunk (png_structp \fP\fIpng_ptr\fP\fB, int \fP\fIcomp_type\fP\fB, png_size_t \fP\fIchunklength\fP\fB, png_size_t \fP\fIprefix_length\fP\fB, png_size_t \fI*data_length\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_destroy_struct (png_voidp \fIstruct_ptr\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_destroy_struct_2 (png_voidp \fP\fIstruct_ptr\fP\fB, png_free_ptr \fP\fIfree_fn\fP\fB, png_voidp \fImem_ptr\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_do_background (png_row_infop \fP\fIrow_info\fP\fB, png_bytep \fP\fIrow\fP\fB, png_color_16p \fP\fItrans_color\fP\fB, png_color_16p \fP\fIbackground\fP\fB, png_color_16p \fP\fIbackground_1\fP\fB, png_bytep \fP\fIgamma_table\fP\fB, png_bytep \fP\fIgamma_from_1\fP\fB, png_bytep \fP\fIgamma_to_1\fP\fB, png_uint_16pp \fP\fIgamma_16\fP\fB, png_uint_16pp \fP\fIgamma_16_from_1\fP\fB, png_uint_16pp \fP\fIgamma_16_to_1\fP\fB, int \fIgamma_shift\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_do_bgr (png_row_infop \fP\fIrow_info\fP\fB, png_bytep \fIrow\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_do_chop (png_row_infop \fP\fIrow_info\fP\fB, png_bytep \fIrow\fP\fB);\fP
 
-\fI\fB
-
 \fBvoid png_do_expand (png_row_infop \fP\fIrow_info\fP\fB, png_bytep \fP\fIrow\fP\fB, png_color_16p \fItrans_value\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_do_expand_palette (png_row_infop \fP\fIrow_info\fP\fB, png_bytep \fP\fIrow\fP\fB, png_colorp \fP\fIpalette\fP\fB, png_bytep \fP\fItrans\fP\fB, int \fInum_trans\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_do_gamma (png_row_infop \fP\fIrow_info\fP\fB, png_bytep \fP\fIrow\fP\fB, png_bytep \fP\fIgamma_table\fP\fB, png_uint_16pp \fP\fIgamma_16_table\fP\fB, int \fIgamma_shift\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_do_gray_to_rgb (png_row_infop \fP\fIrow_info\fP\fB, png_bytep \fIrow\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_do_invert (png_row_infop \fP\fIrow_info\fP\fB, png_bytep \fIrow\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_do_pack (png_row_infop \fP\fIrow_info\fP\fB, png_bytep \fP\fIrow\fP\fB, png_uint_32 \fIbit_depth\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_do_packswap (png_row_infop \fP\fIrow_info\fP\fB, png_bytep \fIrow\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_do_quantize (png_row_infop \fP\fIrow_info\fP\fB, png_bytep \fP\fIrow\fP\fB, png_bytep \fP\fIpalette_lookup\fP\fB, png_bytep \fIquantize_lookup\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_do_read_filler (png_row_infop \fP\fIrow_info\fP\fB, png_bytep \fP\fIrow\fP\fB, png_uint_32 \fP\fIfiller\fP\fB, png_uint_32 \fIflags\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_do_read_interlace (png_row_infop \fP\fIrow_info\fP\fB, png_bytep \fP\fIrow\fP\fB, int \fP\fIpass\fP\fB, png_uint_32 \fItransformations\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_do_read_invert_alpha (png_row_infop \fP\fIrow_info\fP\fB, png_bytep \fIrow\fP\fB);\fP
 
-\fI\fB
-
 \fBvoid png_do_read_swap_alpha (png_row_infop \fP\fIrow_info\fP\fB, png_bytep \fIrow\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_do_read_transformations (png_structp \fIpng_ptr\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBint png_do_rgb_to_gray (png_row_infop \fP\fIrow_info\fP\fB, png_bytep \fIrow\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_do_shift (png_row_infop \fP\fIrow_info\fP\fB, png_bytep \fP\fIrow\fP\fB, png_color_8p \fIbit_depth\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_do_strip_filler (png_row_infop \fP\fIrow_info\fP\fB, png_bytep \fP\fIrow\fP\fB, png_uint_32 \fIflags\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_do_swap (png_row_infop \fP\fIrow_info\fP\fB, png_bytep \fIrow\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_do_unpack (png_row_infop \fP\fIrow_info\fP\fB, png_bytep \fIrow\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_do_unshift (png_row_infop \fP\fIrow_info\fP\fB, png_bytep \fP\fIrow\fP\fB, png_color_8p \fIsig_bits\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_do_write_interlace (png_row_infop \fP\fIrow_info\fP\fB, png_bytep \fP\fIrow\fP\fB, int \fIpass\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_do_write_invert_alpha (png_row_infop \fP\fIrow_info\fP\fB, png_bytep \fIrow\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_do_write_swap_alpha (png_row_infop \fP\fIrow_info\fP\fB, png_bytep \fIrow\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_do_write_transformations (png_structp \fIpng_ptr\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid *png_far_to_near (png_structp png_ptr,png_voidp \fP\fIptr\fP\fB, int \fIcheck\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_flush (png_structp \fIpng_ptr\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_handle_bKGD (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_handle_cHRM (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_handle_gAMA (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_handle_hIST (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_handle_IEND (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_handle_IHDR (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_handle_iCCP (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_handle_iTXt (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_handle_oFFs (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_handle_pCAL (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_handle_pHYs (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_handle_PLTE (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_handle_sBIT (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_handle_sCAL (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_handle_sPLT (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_handle_sRGB (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_handle_tEXt (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_handle_tIME (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_handle_tRNS (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_handle_unknown (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_handle_zTXt (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_info_destroy (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fIinfo_ptr\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_init_mmx_flags (png_structp \fIpng_ptr\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_init_read_transformations (png_structp \fIpng_ptr\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_process_IDAT_data (png_structp \fP\fIpng_ptr\fP\fB, png_bytep \fP\fIbuffer\fP\fB, png_size_t \fIbuffer_length\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_process_some_data (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fIinfo_ptr\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_push_check_crc (png_structp \fIpng_ptr\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_push_crc_finish (png_structp \fIpng_ptr\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_push_crc_skip (png_structp \fP\fIpng_ptr\fP\fB, png_uint_32 \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_push_fill_buffer (png_structp \fP\fIpng_ptr\fP\fB, png_bytep \fP\fIbuffer\fP\fB, png_size_t \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_push_handle_tEXt (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_push_handle_unknown (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_push_handle_zTXt (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_uint_32 \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_push_have_end (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fIinfo_ptr\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_push_have_info (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fIinfo_ptr\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_push_have_row (png_structp \fP\fIpng_ptr\fP\fB, png_bytep \fIrow\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_push_process_row (png_structp \fIpng_ptr\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_push_read_chunk (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fIinfo_ptr\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_push_read_end (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fIinfo_ptr\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_push_read_IDAT (png_structp \fIpng_ptr\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_push_read_sig (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fIinfo_ptr\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_push_read_tEXt (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fIinfo_ptr\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_push_read_zTXt (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fIinfo_ptr\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_push_restore_buffer (png_structp \fP\fIpng_ptr\fP\fB, png_bytep \fP\fIbuffer\fP\fB, png_size_t \fIbuffer_length\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_push_save_buffer (png_structp \fIpng_ptr\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_read_data (png_structp \fP\fIpng_ptr\fP\fB, png_bytep \fP\fIdata\fP\fB, png_size_t \fIlength\fP\fB);\fP
 
-\fI\fB
-
 \fBvoid png_read_destroy (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_infop \fIend_info_ptr\fP\fB);\fP
 
-\fI\fB
-
 \fBvoid png_read_filter_row (png_structp \fP\fIpng_ptr\fP\fB, png_row_infop \fP\fIrow_info\fP\fB, png_bytep \fP\fIrow\fP\fB, png_bytep \fP\fIprev_row\fP\fB, int \fIfilter\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_read_finish_row (png_structp \fIpng_ptr\fP\fB);\fP
 
-\fI\fB
-
 \fBvoid png_read_push_finish_row (png_structp \fIpng_ptr\fP\fB);\fP
 
-\fI\fB
-
 \fBvoid png_read_sig (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fIinfo_ptr\fP\fB);\fP
 
-\fI\fB
-
 \fBvoid png_read_start_row (png_structp \fIpng_ptr\fP\fB);\fP
 
-\fI\fB
-
 \fBvoid png_read_transform_info (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fIinfo_ptr\fP\fB);\fP
 
-\fI\fB
-
 \fBvoid png_reset_crc (png_structp \fIpng_ptr\fP\fB);\fP
 
-\fI\fB
-
 \fBint png_set_text_2 (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_textp \fP\fItext_ptr\fP\fB, int \fInum_text\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_write_cHRM (png_structp \fP\fIpng_ptr\fP\fB, double \fP\fIwhite_x\fP\fB, double \fP\fIwhite_y\fP\fB, double \fP\fIred_x\fP\fB, double \fP\fIred_y\fP\fB, double \fP\fIgreen_x\fP\fB, double \fP\fIgreen_y\fP\fB, double \fP\fIblue_x\fP\fB, double \fIblue_y\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_write_cHRM_fixed (png_structp \fP\fIpng_ptr\fP\fB, png_uint_32 \fP\fIwhite_x\fP\fB, png_uint_32 \fP\fIwhite_y\fP\fB, png_uint_32 \fP\fIred_x\fP\fB, png_uint_32 \fP\fIred_y\fP\fB, png_uint_32 \fP\fIgreen_x\fP\fB, png_uint_32 \fP\fIgreen_y\fP\fB, png_uint_32 \fP\fIblue_x\fP\fB, png_uint_32 \fIblue_y\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_write_data (png_structp \fP\fIpng_ptr\fP\fB, png_bytep \fP\fIdata\fP\fB, png_size_t \fIlength\fP\fB);\fP
 
-\fI\fB
-
 \fBvoid png_write_destroy (png_structp \fIpng_ptr\fP\fB);\fP
 
-\fI\fB
-
 \fBvoid png_write_filtered_row (png_structp \fP\fIpng_ptr\fP\fB, png_bytep \fIfiltered_row\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_write_find_filter (png_structp \fP\fIpng_ptr\fP\fB, png_row_infop \fIrow_info\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_write_finish_row (png_structp \fIpng_ptr\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_write_gAMA (png_structp \fP\fIpng_ptr\fP\fB, double \fIfile_gamma\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_write_gAMA_fixed (png_structp \fP\fIpng_ptr\fP\fB, png_uint_32 \fIint_file_gamma\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_write_hIST (png_structp \fP\fIpng_ptr\fP\fB, png_uint_16p \fP\fIhist\fP\fB, int \fInum_hist\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_write_iCCP (png_structp \fP\fIpng_ptr\fP\fB, png_charp \fP\fIname\fP\fB, int \fP\fIcompression_type\fP\fB, png_charp \fP\fIprofile\fP\fB, int \fIproflen\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_write_IDAT (png_structp \fP\fIpng_ptr\fP\fB, png_bytep \fP\fIdata\fP\fB, png_size_t \fIlength\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_write_IEND (png_structp \fIpng_ptr\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_write_IHDR (png_structp \fP\fIpng_ptr\fP\fB, png_uint_32 \fP\fIwidth\fP\fB, png_uint_32 \fP\fIheight\fP\fB, int \fP\fIbit_depth\fP\fB, int \fP\fIcolor_type\fP\fB, int \fP\fIcompression_type\fP\fB, int \fP\fIfilter_type\fP\fB, int \fIinterlace_type\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_write_iTXt (png_structp \fP\fIpng_ptr\fP\fB, int \fP\fIcompression\fP\fB, png_charp \fP\fIkey\fP\fB, png_charp \fP\fIlang\fP\fB, png_charp \fP\fItranslated_key\fP\fB, png_charp \fItext\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_write_oFFs (png_structp \fP\fIpng_ptr\fP\fB, png_uint_32 \fP\fIx_offset\fP\fB, png_uint_32 \fP\fIy_offset\fP\fB, int \fIunit_type\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_write_pCAL (png_structp \fP\fIpng_ptr\fP\fB, png_charp \fP\fIpurpose\fP\fB, png_int_32 \fP\fIX0\fP\fB, png_int_32 \fP\fIX1\fP\fB, int \fP\fItype\fP\fB, int \fP\fInparams\fP\fB, png_charp \fP\fIunits\fP\fB, png_charpp \fIparams\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_write_pHYs (png_structp \fP\fIpng_ptr\fP\fB, png_uint_32 \fP\fIx_pixels_per_unit\fP\fB, png_uint_32 \fP\fIy_pixels_per_unit\fP\fB, int \fIunit_type\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_write_PLTE (png_structp \fP\fIpng_ptr\fP\fB, png_colorp \fP\fIpalette\fP\fB, png_uint_32 \fInum_pal\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_write_sBIT (png_structp \fP\fIpng_ptr\fP\fB, png_color_8p \fP\fIsbit\fP\fB, int \fIcolor_type\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_write_sCAL (png_structp \fP\fIpng_ptr\fP\fB, png_charp \fP\fIunit\fP\fB, double \fP\fIwidth\fP\fB, double \fIheight\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_write_sCAL_s (png_structp \fP\fIpng_ptr\fP\fB, png_charp \fP\fIunit\fP\fB, png_charp \fP\fIwidth\fP\fB, png_charp \fIheight\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_write_sRGB (png_structp \fP\fIpng_ptr\fP\fB, int \fIintent\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_write_sPLT (png_structp \fP\fIpng_ptr\fP\fB, png_spalette_p \fIpalette\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_write_start_row (png_structp \fIpng_ptr\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_write_tEXt (png_structp \fP\fIpng_ptr\fP\fB, png_charp \fP\fIkey\fP\fB, png_charp \fP\fItext\fP\fB, png_size_t \fItext_len\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_write_tIME (png_structp \fP\fIpng_ptr\fP\fB, png_timep \fImod_time\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_write_tRNS (png_structp \fP\fIpng_ptr\fP\fB, png_bytep \fP\fItrans\fP\fB, png_color_16p \fP\fIvalues\fP\fB, int \fP\fInumber\fP\fB, int \fIcolor_type\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_write_zTXt (png_structp \fP\fIpng_ptr\fP\fB, png_charp \fP\fIkey\fP\fB, png_charp \fP\fItext\fP\fB, png_size_t \fP\fItext_len\fP\fB, int \fIcompression\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoidpf png_zalloc (voidpf \fP\fIpng_ptr\fP\fB, uInt \fP\fIitems\fP\fB, uInt \fIsize\fP\fB);\fP
 
-\fI\fB
-
-\fI\fB
-
 \fBvoid png_zfree (voidpf \fP\fIpng_ptr\fP\fB, voidpf \fIptr\fP\fB);\fP
 
 \fI\fB
 
-\fI\fB
-
 .SH DESCRIPTION
 The functions listed above are used privately by libpng
 and are not recommended for use by applications.  They are

missing

@@ -1,11 +1,10 @@
 #! /bin/sh
-# Common stub for a few missing GNU programs while installing.
+# Common wrapper for a few potentially missing GNU programs.
 
-scriptversion=2009-04-28.21; # UTC
+scriptversion=2013-10-28.13; # UTC
 
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
-# 2008, 2009 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -26,69 +25,40 @@ scriptversion=2009-04-28.21; # UTC
 # the same distribution terms that you use for the rest of that program.
 
 if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
+  echo 1>&2 "Try '$0 --help' for more information"
   exit 1
 fi
 
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
 case $1 in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  # Exit code 63 means version mismatch.  This often happens
-  # when the user try to use an ancient version of a tool on
-  # a file that requires a minimum version.  In this case we
-  # we should proceed has if the program had been absent, or
-  # if --run hadn't been passed.
-  if test $? = 63; then
-    run=:
-    msg="probably too old"
-  fi
-  ;;
+
+  --is-lightweight)
+    # Used by our autoconf macros to check whether the available missing
+    # script is modern enough.
+    exit 0
+    ;;
+
+  --run)
+    # Back-compat with the calling convention used by older automake.
+    shift
+    ;;
 
   -h|--h|--he|--hel|--help)
     echo "\
 $0 [OPTION]... PROGRAM [ARGUMENT]...
 
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
+Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
+to PROGRAM being missing or too old.
 
 Options:
   -h, --help      display this help and exit
   -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
 
 Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  autom4te     touch the output file, or create a stub one
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
+  aclocal   autoconf  autoheader   autom4te  automake  makeinfo
+  bison     yacc      flex         lex       help2man
 
-Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
-\`g' are ignored when checking the name.
+Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+'g' are ignored when checking the name.
 
 Send bug reports to <bug-automake@gnu.org>."
     exit $?
@@ -100,272 +70,141 @@ Send bug reports to <bug-automake@gnu.org>."
     ;;
 
   -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
+    echo 1>&2 "$0: unknown '$1' option"
+    echo 1>&2 "Try '$0 --help' for more information"
     exit 1
     ;;
 
 esac
 
-# normalize program name to check for.
-program=`echo "$1" | sed '
-  s/^gnu-//; t
-  s/^gnu//; t
-  s/^g//; t'`
+# Run the given program, remember its exit status.
+"$@"; st=$?
 
-# Now exit if we have it, but it failed.  Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).  This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
-  lex*|yacc*)
-    # Not GNU programs, they don't have --version.
+# If it succeeded, we are done.
+test $st -eq 0 && exit 0
+
+# Also exit now if we it failed (or wasn't found), and '--version' was
+# passed; such an option is passed most likely to detect whether the
+# program is present and works.
+case $2 in --version|--help) exit $st;; esac
+
+# Exit code 63 means version mismatch.  This often happens when the user
+# tries to use an ancient version of a tool on a file that requires a
+# minimum version.
+if test $st -eq 63; then
+  msg="probably too old"
+elif test $st -eq 127; then
+  # Program was missing.
+  msg="missing on your system"
+else
+  # Program was found and executed, but failed.  Give up.
+  exit $st
+fi
+
+perl_URL=http://www.perl.org/
+flex_URL=http://flex.sourceforge.net/
+gnu_software_URL=http://www.gnu.org/software
+
+program_details ()
+{
+  case $1 in
+    aclocal|automake)
+      echo "The '$1' program is part of the GNU Automake package:"
+      echo "<$gnu_software_URL/automake>"
+      echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/autoconf>"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+    autoconf|autom4te|autoheader)
+      echo "The '$1' program is part of the GNU Autoconf package:"
+      echo "<$gnu_software_URL/autoconf/>"
+      echo "It also requires GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+  esac
+}
+
+give_advice ()
+{
+  # Normalize program name to check for.
+  normalized_program=`echo "$1" | sed '
+    s/^gnu-//; t
+    s/^gnu//; t
+    s/^g//; t'`
+
+  printf '%s\n' "'$1' is $msg."
+
+  configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+  case $normalized_program in
+    autoconf*)
+      echo "You should only need it if you modified 'configure.ac',"
+      echo "or m4 files included by it."
+      program_details 'autoconf'
+      ;;
+    autoheader*)
+      echo "You should only need it if you modified 'acconfig.h' or"
+      echo "$configure_deps."
+      program_details 'autoheader'
+      ;;
+    automake*)
+      echo "You should only need it if you modified 'Makefile.am' or"
+      echo "$configure_deps."
+      program_details 'automake'
+      ;;
+    aclocal*)
+      echo "You should only need it if you modified 'acinclude.m4' or"
+      echo "$configure_deps."
+      program_details 'aclocal'
+      ;;
+   autom4te*)
+      echo "You might have modified some maintainer files that require"
+      echo "the 'autom4te' program to be rebuilt."
+      program_details 'autom4te'
+      ;;
+    bison*|yacc*)
+      echo "You should only need it if you modified a '.y' file."
+      echo "You may want to install the GNU Bison package:"
+      echo "<$gnu_software_URL/bison/>"
+      ;;
+    lex*|flex*)
+      echo "You should only need it if you modified a '.l' file."
+      echo "You may want to install the Fast Lexical Analyzer package:"
+      echo "<$flex_URL>"
+      ;;
+    help2man*)
+      echo "You should only need it if you modified a dependency" \
+           "of a man page."
+      echo "You may want to install the GNU Help2man package:"
+      echo "<$gnu_software_URL/help2man/>"
     ;;
+    makeinfo*)
+      echo "You should only need it if you modified a '.texi' file, or"
+      echo "any other file indirectly affecting the aspect of the manual."
+      echo "You might want to install the Texinfo package:"
+      echo "<$gnu_software_URL/texinfo/>"
+      echo "The spurious makeinfo call might also be the consequence of"
+      echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
+      echo "want to install GNU make:"
+      echo "<$gnu_software_URL/make/>"
+      ;;
+    *)
+      echo "You might have modified some files without having the proper"
+      echo "tools for further handling them.  Check the 'README' file, it"
+      echo "often tells you about the needed prerequisites for installing"
+      echo "this package.  You may also peek at any GNU archive site, in"
+      echo "case some other package contains this missing '$1' program."
+      ;;
+  esac
+}
 
-  tar*)
-    if test -n "$run"; then
-       echo 1>&2 "ERROR: \`tar' requires --run"
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       exit 1
-    fi
-    ;;
+give_advice "$1" | sed -e '1s/^/WARNING: /' \
+                       -e '2,$s/^/         /' >&2
 
-  *)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       # Could not run --version or --help.  This is probably someone
-       # running `$TOOL --version' or `$TOOL --help' to check whether
-       # $TOOL exists and not knowing $TOOL uses missing.
-       exit 1
-    fi
-    ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $program in
-  aclocal*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case $f in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  autom4te*)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.
-         You can get \`$1' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo "#! /bin/sh"
-	echo "# Created by GNU Automake missing as a replacement of"
-	echo "#  $ $@"
-	echo "exit 0"
-	chmod +x $file
-	exit 1
-    fi
-    ;;
-
-  bison*|yacc*)
-    echo 1>&2 "\
-WARNING: \`$1' $msg.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if test $# -ne 1; then
-        eval LASTARG="\${$#}"
-	case $LASTARG in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f y.tab.h; then
-	echo >y.tab.h
-    fi
-    if test ! -f y.tab.c; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex*|flex*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if test $# -ne 1; then
-        eval LASTARG="\${$#}"
-	case $LASTARG in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f lex.yy.c; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 \`Help2man' package in order for those modifications to take
-	 effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit $?
-    fi
-    ;;
-
-  makeinfo*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -z "$file"; then
-      # ... or it is the one specified with @setfilename ...
-      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '
-	/^@setfilename/{
-	  s/.* \([^ ]*\) *$/\1/
-	  p
-	  q
-	}' $infile`
-      # ... or it is derived from the source name (dir/f.texi becomes f.info)
-      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
-    fi
-    # If the file does not exist, the user really needs makeinfo;
-    # let's fail without touching anything.
-    test -f $file || exit 1
-    touch $file
-    ;;
-
-  tar*)
-    shift
-
-    # We have already tried tar in the generic part.
-    # Look for gnutar/gtar before invocation to avoid ugly error
-    # messages.
-    if (gnutar --version > /dev/null 2>&1); then
-       gnutar "$@" && exit 0
-    fi
-    if (gtar --version > /dev/null 2>&1); then
-       gtar "$@" && exit 0
-    fi
-    firstarg="$1"
-    if shift; then
-	case $firstarg in
-	*o*)
-	    firstarg=`echo "$firstarg" | sed s/o//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-	case $firstarg in
-	*h*)
-	    firstarg=`echo "$firstarg" | sed s/h//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-    fi
-
-    echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
-         You may want to install GNU tar or Free paxutils, or check the
-         command line arguments."
-    exit 1
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequisites for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0
+# Propagate the correct exit status (expected to be 127 for a program
+# not found, 63 for a program that failed due to version mismatch).
+exit $st
 
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)

png.5

@@ -1,4 +1,4 @@
-.TH PNG 5 "January 22, 2013"
+.TH PNG 5 "February 6, 2014"
 .SH NAME
 png \- Portable Network Graphics (PNG) format
 .SH DESCRIPTION

png.c

@@ -17,7 +17,7 @@
 #include "pngpriv.h"
 
 /* Generate a compiler error if there is an old png.h in the search path. */
-typedef version_1_4_13beta02 Your_png_h_is_not_version_1_4_13beta02;
+typedef version_1_4_13 Your_png_h_is_not_version_1_4_13;
 
 /* Tells libpng that we have already handled the first "num_bytes" bytes
  * of the PNG file signature.  If the PNG data is embedded into another
@@ -547,13 +547,13 @@ png_get_copyright(png_const_structp png_ptr)
 #else
 #ifdef __STDC__
    return ((png_charp) PNG_STRING_NEWLINE \
-     "libpng version 1.4.13beta02 - January 22, 2013" PNG_STRING_NEWLINE \
+     "libpng version 1.4.13 - February 6, 2014" PNG_STRING_NEWLINE \
      "Copyright (c) 1998-2010 Glenn Randers-Pehrson" PNG_STRING_NEWLINE \
      "Copyright (c) 1996-1997 Andreas Dilger" PNG_STRING_NEWLINE \
      "Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc." \
      PNG_STRING_NEWLINE);
 #else
-      return ((png_charp) "libpng version 1.4.13beta02 - January 22, 2013\
+      return ((png_charp) "libpng version 1.4.13 - February 6, 2014\
       Copyright (c) 1998-2010 Glenn Randers-Pehrson\
       Copyright (c) 1996-1997 Andreas Dilger\
       Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc.");
@@ -823,14 +823,6 @@ png_check_IHDR(png_structp png_ptr,
       error = 1;
    }
 
-   if ( width > (PNG_UINT_32_MAX
-                 >> 3)      /* 8-byte RGBA pixels */
-                 - 64       /* bigrowbuf hack */
-                 - 1        /* filter byte */
-                 - 7*8      /* rounding of width to multiple of 8 pixels */
-                 - 8)       /* extra max_pixel_depth pad */
-      png_warning(png_ptr, "Width is too large for libpng to process pixels");
-
    /* Check other values */
    if (bit_depth != 1 && bit_depth != 2 && bit_depth != 4 &&
        bit_depth != 8 && bit_depth != 16)

png.h

@@ -1,7 +1,7 @@
 
 /* png.h - header file for PNG reference library
  *
- * libpng version 1.4.13beta02 - January 22, 2013
+ * libpng version 1.4.13 - February 6, 2014
  * Copyright (c) 1998-2011 Glenn Randers-Pehrson
  * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
  * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
@@ -11,7 +11,7 @@
  * Authors and maintainers:
  *  libpng versions 0.71, May 1995, through 0.88, January 1996: Guy Schalnat
  *  libpng versions 0.89c, June 1996, through 0.96, May 1997: Andreas Dilger
- *  libpng versions 0.97, January 1998, through 1.4.13beta02 - January 22, 2013: Glenn
+ *  libpng versions 0.97, January 1998, through 1.4.13 - February 6, 2014: Glenn
  *  See also "Contributing Authors", below.
  *
  * Note about libpng version numbers:
@@ -170,7 +170,9 @@
  *    1.4.11rc01              14    10411  14.so.14.11[.0]
  *    1.4.11                  14    10411  14.so.14.11[.0]
  *    1.4.12                  14    10412  14.so.14.12[.0]
- *    1.4.13beta01-02         14    10413  14.so.14.13[.0]
+ *    1.4.13beta01-06         14    10413  14.so.14.13[.0]
+ *    1.4.13rc01-02           14    10413  14.so.14.13[.0]
+ *    1.4.13                  14    10413  14.so.14.13[.0]
  *
  *    Henceforth the source version will match the shared-library major
  *    and minor numbers; the shared-library major version number will be
@@ -202,8 +204,8 @@
  *
  * This code is released under the libpng license.
  *
- * libpng versions 1.2.6, August 15, 2004, through 1.4.13beta02, January 22, 2013, are
- * Copyright (c) 2004, 2006-2010 Glenn Randers-Pehrson, and are
+ * libpng versions 1.2.6, August 15, 2004, through 1.4.13, February 6, 2014, are
+ * Copyright (c) 2004, 2006-2013 Glenn Randers-Pehrson, and are
  * distributed according to the same disclaimer and license as libpng-1.2.5
  * with the following individual added to the list of Contributing Authors:
  *
@@ -314,13 +316,13 @@
  * Y2K compliance in libpng:
  * =========================
  *
- *    January 22, 2013
+ *    February 6, 2014
  *
  *    Since the PNG Development group is an ad-hoc body, we can't make
  *    an official declaration.
  *
  *    This is your unofficial assurance that libpng from version 0.71 and
- *    upward through 1.4.13beta02 are Y2K compliant.  It is my belief that earlier
+ *    upward through 1.4.13 are Y2K compliant.  It is my belief that earlier
  *    versions were also Y2K compliant.
  *
  *    Libpng only has three year fields.  One is a 2-byte unsigned integer
@@ -376,9 +378,9 @@
  */
 
 /* Version information for png.h - this should match the version in png.c */
-#define PNG_LIBPNG_VER_STRING "1.4.13beta02"
+#define PNG_LIBPNG_VER_STRING "1.4.13"
 #define PNG_HEADER_VERSION_STRING \
-   " libpng version 1.4.13beta02 - January 22, 2013\n"
+   " libpng version 1.4.13 - February 6, 2014\n"
 
 #define PNG_LIBPNG_VER_SONUM   14
 #define PNG_LIBPNG_VER_DLLNUM  14
@@ -391,7 +393,7 @@
  * PNG_LIBPNG_VER_STRING, omitting any leading zero:
  */
 
-#define PNG_LIBPNG_VER_BUILD  02
+#define PNG_LIBPNG_VER_BUILD  0
 
 /* Release Status */
 #define PNG_LIBPNG_BUILD_ALPHA    1
@@ -408,7 +410,7 @@
 #define PNG_LIBPNG_BUILD_SPECIAL 32 /* Cannot be OR'ed with
                                        PNG_LIBPNG_BUILD_PRIVATE */
 
-#define PNG_LIBPNG_BUILD_BASE_TYPE PNG_LIBPNG_BUILD_BETA
+#define PNG_LIBPNG_BUILD_BASE_TYPE PNG_LIBPNG_BUILD_STABLE
 
 /* Careful here.  At one time, Guy wanted to use 082, but that would be octal.
  * We must not include leading zeros.
@@ -1502,7 +1504,7 @@ struct png_struct_def
 /* This triggers a compiler error in png.c, if png.c and png.h
  * do not agree upon the version number.
  */
-typedef png_structp version_1_4_13beta02;
+typedef png_structp version_1_4_13;
 
 typedef png_struct FAR * FAR * png_structpp;
 

pngconf.h

@@ -1,7 +1,7 @@
 
 /* pngconf.h - machine configurable file for libpng
  *
- * libpng version 1.4.13beta02 - January 22, 2013
+ * libpng version 1.4.13 - February 6, 2014
  * For conditions of distribution and use, see copyright notice in png.h
  * Copyright (c) 1998-2011 Glenn Randers-Pehrson
  * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)

pngpriv.h

@@ -1,9 +1,9 @@
 
 /* pngpriv.h - private declarations for use inside libpng
  *
- * libpng version 1.4.13beta02 - January 22, 2013
+ * libpng version 1.4.13 - February 6, 2014
  * For conditions of distribution and use, see copyright notice in png.h
- * Copyright (c) 1998-2011 Glenn Randers-Pehrson
+ * Copyright (c) 1998-2014 Glenn Randers-Pehrson
  * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
  * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
  *
@@ -886,7 +886,7 @@ PNG_EXTERN void *png_far_to_near PNGARG((png_structp png_ptr,png_voidp ptr,
 #      define png_debug(l,m) \
        { \
        int num_tabs=l; \
-       fprintf(PNG_DEBUG_FILE,"%s"m PNG_STRING_NEWLINE,(num_tabs==1 ? "\t" : \
+       fprintf(PNG_DEBUG_FILE,"%s" m PNG_STRING_NEWLINE,(num_tabs==1 ? "\t" : \
          (num_tabs==2 ? "\t\t":(num_tabs>2 ? "\t\t\t":"")))); \
        }
 #    endif
@@ -894,7 +894,7 @@ PNG_EXTERN void *png_far_to_near PNGARG((png_structp png_ptr,png_voidp ptr,
 #      define png_debug1(l,m,p1) \
        { \
        int num_tabs=l; \
-       fprintf(PNG_DEBUG_FILE,"%s"m PNG_STRING_NEWLINE,(num_tabs==1 ? "\t" : \
+       fprintf(PNG_DEBUG_FILE,"%s" m PNG_STRING_NEWLINE,(num_tabs==1 ? "\t" : \
          (num_tabs==2 ? "\t\t":(num_tabs>2 ? "\t\t\t":""))),p1); \
        }
 #    endif
@@ -902,7 +902,7 @@ PNG_EXTERN void *png_far_to_near PNGARG((png_structp png_ptr,png_voidp ptr,
 #      define png_debug2(l,m,p1,p2) \
        { \
        int num_tabs=l; \
-       fprintf(PNG_DEBUG_FILE,"%s"m PNG_STRING_NEWLINE,(num_tabs==1 ? "\t" : \
+       fprintf(PNG_DEBUG_FILE,"%s" m PNG_STRING_NEWLINE,(num_tabs==1 ? "\t" : \
          (num_tabs==2 ? "\t\t":(num_tabs>2 ? "\t\t\t":""))),p1,p2); \
        }
 #    endif

pngread.c

@@ -1,8 +1,8 @@
 
 /* pngread.c - read a PNG file
  *
- * Last changed in libpng 1.4.10 [March 8, 2012]
- * Copyright (c) 1998-2012 Glenn Randers-Pehrson
+ * Last changed in libpng 1.4.13 [%RDATE%]
+ * Copyright (c) 1998-2014 Glenn Randers-Pehrson
  * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
  * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
  *
@@ -1232,7 +1232,7 @@ png_read_png(png_structp png_ptr, png_infop info_ptr,
    if (transforms & PNG_TRANSFORM_EXPAND)
       if ((png_ptr->bit_depth < 8) ||
           (png_ptr->color_type == PNG_COLOR_TYPE_PALETTE) ||
-          (png_get_valid(png_ptr, info_ptr, PNG_INFO_tRNS)))
+          (info_ptr->valid & PNG_INFO_tRNS))
          png_set_expand(png_ptr);
 #endif
 
@@ -1251,14 +1251,8 @@ png_read_png(png_structp png_ptr, png_infop info_ptr,
     * [0,65535] to the original [0,7] or [0,31], or whatever range the
     * colors were originally in:
     */
-   if ((transforms & PNG_TRANSFORM_SHIFT)
-       && png_get_valid(png_ptr, info_ptr, PNG_INFO_sBIT))
-   {
-      png_color_8p sig_bit;
-
-      png_get_sBIT(png_ptr, info_ptr, &sig_bit);
-      png_set_shift(png_ptr, sig_bit);
-   }
+   if ((transforms & PNG_TRANSFORM_SHIFT) && (info_ptr->valid & PNG_INFO_sBIT))
+      png_set_shift(png_ptr, &info_ptr->sig_bit);
 #endif
 
 #ifdef PNG_READ_BGR_SUPPORTED

pngrtran.c

@@ -1,8 +1,8 @@
 
 /* pngrtran.c - transforms the data in a row for PNG readers
  *
- * Last changed in libpng 1.4.11 [March 29, 2012]
- * Copyright (c) 1998-2012 Glenn Randers-Pehrson
+ * Last changed in libpng 1.4.13 [February 6, 2014]
+ * Copyright (c) 1998-2014 Glenn Randers-Pehrson
  * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
  * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
  *
@@ -910,7 +910,10 @@ png_init_read_transformations(png_structp png_ptr)
     for (i=0; i<png_ptr->num_trans; i++)
     {
       if (png_ptr->trans_alpha[i] != 0 && png_ptr->trans_alpha[i] != 0xff)
+      {
         k=1; /* Partial transparency is present */
+        break;
+      }
     }
     if (k == 0)
       png_ptr->transformations &= ~PNG_GAMMA;

pngset.c

@@ -1,8 +1,8 @@
 
 /* pngset.c - storage of image information into info struct
  *
- * Last changed in libpng 1.4.13 [January 22, 2013]
- * Copyright (c) 1998-2013 Glenn Randers-Pehrson
+ * Last changed in libpng 1.4.13 [February 6, 2014]
+ * Copyright (c) 1998-2014 Glenn Randers-Pehrson
  * (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
  * (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
  *
@@ -250,16 +250,7 @@ png_set_IHDR(png_structp png_ptr, png_infop info_ptr,
       info_ptr->channels++;
    info_ptr->pixel_depth = (png_byte)(info_ptr->channels * info_ptr->bit_depth);
 
-   /* Check for potential overflow */
-   if (width > (PNG_UINT_32_MAX
-                 >> 3)      /* 8-byte RGBA pixels */
-                 - 64       /* bigrowbuf hack */
-                 - 1        /* filter byte */
-                 - 7*8      /* rounding of width to multiple of 8 pixels */
-                 - 8)       /* extra max_pixel_depth pad */
-      info_ptr->rowbytes = 0;
-   else
-      info_ptr->rowbytes = PNG_ROWBYTES(info_ptr->pixel_depth, width);
+   info_ptr->rowbytes = PNG_ROWBYTES(info_ptr->pixel_depth, width);
 }
 
 #ifdef PNG_oFFs_SUPPORTED
@@ -539,6 +530,7 @@ png_set_sRGB_gAMA_and_cHRM(png_structp png_ptr, png_infop info_ptr,
 #endif
 
 #ifdef PNG_cHRM_SUPPORTED
+#  ifdef PNG_FIXED_POINT_SUPPORTED
    int_white_x = 31270L;
    int_white_y = 32900L;
    int_red_x   = 64000L;
@@ -547,8 +539,12 @@ png_set_sRGB_gAMA_and_cHRM(png_structp png_ptr, png_infop info_ptr,
    int_green_y = 60000L;
    int_blue_x  = 15000L;
    int_blue_y  =  6000L;
+   png_set_cHRM_fixed(png_ptr, info_ptr,
+       int_white_x, int_white_y, int_red_x, int_red_y, int_green_x,
+       int_green_y, int_blue_x, int_blue_y);
+#  endif
 
-#ifdef PNG_FLOATING_POINT_SUPPORTED
+#  ifdef PNG_FLOATING_POINT_SUPPORTED
    white_x = (float).3127;
    white_y = (float).3290;
    red_x   = (float).64;
@@ -557,17 +553,9 @@ png_set_sRGB_gAMA_and_cHRM(png_structp png_ptr, png_infop info_ptr,
    green_y = (float).60;
    blue_x  = (float).15;
    blue_y  = (float).06;
-#endif
-
-#ifdef PNG_FIXED_POINT_SUPPORTED
-   png_set_cHRM_fixed(png_ptr, info_ptr,
-       int_white_x, int_white_y, int_red_x, int_red_y, int_green_x,
-       int_green_y, int_blue_x, int_blue_y);
-#endif
-#ifdef PNG_FLOATING_POINT_SUPPORTED
    png_set_cHRM(png_ptr, info_ptr,
        white_x, white_y, red_x, red_y, green_x, green_y, blue_x, blue_y);
-#endif
+#  endif
 #endif /* cHRM */
 }
 #endif /* sRGB */

pngtest.c

@@ -1702,4 +1702,4 @@ main(int argc, char *argv[])
 }
 
 /* Generate a compiler error if there is an old png.h in the search path. */
-typedef version_1_4_13beta02 your_png_h_is_not_version_1_4_13beta02;
+typedef version_1_4_13 your_png_h_is_not_version_1_4_13;

projects/vstudio/readme.txt

@@ -1,7 +1,7 @@
 
 VisualStudio instructions
 
-libpng version 1.4.13beta02 - January 22, 2013
+libpng version 1.4.13 - February 6, 2014
 
 Copyright (c) 1998-2010 Glenn Randers-Pehrson
 

projects/vstudio/zlib.props

@@ -2,7 +2,7 @@
 <!--
  * zlib.props - location of zlib source and build
  *
- * libpng version 1.4.13beta02 - January 22, 2013
+ * libpng version 1.4.13 - February 6, 2014
  *
  * Copyright (c) 1998-2011 Glenn Randers-Pehrson
  *

scripts/README.txt

@@ -1,8 +1,8 @@
 
-Makefiles for  libpng version 1.4.13beta02 - January 22, 2013
+Makefiles for  libpng version 1.4.13 - February 6, 2014
 
  makefile.linux    =>  Linux/ELF makefile
-                       (gcc, creates libpng14.so.14.1.4.13beta02)
+                       (gcc, creates libpng14.so.14.1.4.13)
  makefile.gcc      =>  Generic makefile (gcc, creates static libpng.a)
  makefile.knr      =>  Archaic UNIX Makefile that converts files with
                        ansi2knr (Requires ansi2knr.c from
@@ -20,7 +20,7 @@ Makefiles for  libpng version 1.4.13beta02 - January 22, 2013
  makefile.dec      =>  DEC Alpha UNIX makefile
  makefile.dj2      =>  DJGPP 2 makefile
  makefile.elf      =>  Linux/ELF makefile symbol versioning,
-                       (gcc, creates libpng14.so.14.1.4.13beta02)
+                       (gcc, creates libpng14.so.14.1.4.13)
  makefile.freebsd  =>  FreeBSD makefile
  makefile.gcc      =>  Generic gcc makefile
  makefile.hpgcc    =>  HPUX makefile using gcc
@@ -36,12 +36,12 @@ Makefiles for  libpng version 1.4.13beta02 - January 22, 2013
  makefile.os2      =>  OS/2 Makefile (gcc and emx, requires pngos2.def)
  makefile.sco      =>  For SCO OSr5  ELF and Unixware 7 with Native cc
  makefile.sggcc    =>  Silicon Graphics (gcc,
-                       creates libpng14.so.14.1.4.13beta02)
+                       creates libpng14.so.14.1.4.13)
  makefile.sgi      =>  Silicon Graphics IRIX makefile (cc, creates static lib)
  makefile.solaris  =>  Solaris 2.X makefile (gcc,
-                       creates libpng14.so.14.1.4.13beta02)
+                       creates libpng14.so.14.1.4.13)
  makefile.so9      =>  Solaris 9 makefile (gcc,
-                       creates libpng14.so.14.1.4.13beta02)
+                       creates libpng14.so.14.1.4.13)
  makefile.std      =>  Generic UNIX makefile (cc, creates static libpng.a)
  makefile.sunos    =>  Sun makefile
  makefile.32sunu   =>  Sun Ultra 32-bit makefile

scripts/libpng-config-head.in

@@ -11,7 +11,7 @@
 
 # Modeled after libxml-config.
 
-version=1.4.13beta02
+version=1.4.13
 prefix=""
 libdir=""
 libs=""

scripts/libpng.pc.in

@@ -5,6 +5,6 @@ includedir=@includedir@/libpng14
 
 Name: libpng
 Description: Loads and saves PNG files
-Version: 1.4.13beta02
+Version: 1.4.13
 Libs: -L${libdir} -lpng14
 Cflags: -I${includedir}

scripts/makefile.ne12bsd

@@ -17,7 +17,7 @@ INCSDIR=${LOCALBASE}/include/libpng14
 
 LIB=	png14
 SHLIB_MAJOR=	0
-SHLIB_MINOR=	1.4.13beta02
+SHLIB_MINOR=	1.4.13
 SRCS=	png.c pngset.c pngget.c pngrutil.c pngtrans.c pngwutil.c \
 	pngread.c pngrio.c pngwio.c pngwrite.c pngrtran.c \
 	pngwtran.c pngmem.c pngerror.c pngpread.c

scripts/makefile.netbsd

@@ -17,7 +17,7 @@ INCSDIR=${LOCALBASE}/include
 
 LIB=	png
 SHLIB_MAJOR=	3
-SHLIB_MINOR=	1.4.13beta02
+SHLIB_MINOR=	1.4.13
 SRCS=	png.c pngset.c pngget.c pngrutil.c pngtrans.c pngwutil.c \
 	pngread.c pngrio.c pngwio.c pngwrite.c pngrtran.c \
 	pngwtran.c pngmem.c pngerror.c pngpread.c

scripts/makefile.openbsd

@@ -11,7 +11,7 @@ LIBDIR=	${PREFIX}/lib
 MANDIR= ${PREFIX}/man/cat
 
 SHLIB_MAJOR=	0
-SHLIB_MINOR=	1.4.13beta02
+SHLIB_MINOR=	1.4.13
 
 LIB=	png
 SRCS=	png.c pngerror.c pngget.c pngmem.c pngpread.c \

scripts/png32ce.def

@@ -15,7 +15,7 @@ LIBRARY lpngce
  png_get_int_32
 
 EXPORTS
-;Version 1.4.13beta02
+;Version 1.4.13
   png_build_grayscale_palette  @1
 ;  png_check_sig        @2
   png_chunk_error      @3

scripts/pngos2.def

@@ -2,7 +2,7 @@
 ; PNG.LIB module definition file for OS/2
 ;----------------------------------------
 
-; Version 1.4.13beta02
+; Version 1.4.13
 
 LIBRARY		PNG
 DESCRIPTION	"PNG image compression library for OS/2"

scripts/pngwin.def

@@ -5,7 +5,7 @@
 LIBRARY
 
 EXPORTS
-;Version 1.4.13beta02
+;Version 1.4.13
   png_build_grayscale_palette
   png_chunk_error
   png_chunk_warning

test-driver

@@ -0,0 +1,139 @@
+#! /bin/sh
+# test-driver - basic testsuite driver script.
+
+scriptversion=2013-07-13.22; # UTC
+
+# Copyright (C) 2011-2013 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+# Make unconditional expansion of undefined variables an error.  This
+# helps a lot in preventing typo-related bugs.
+set -u
+
+usage_error ()
+{
+  echo "$0: $*" >&2
+  print_usage >&2
+  exit 2
+}
+
+print_usage ()
+{
+  cat <<END
+Usage:
+  test-driver --test-name=NAME --log-file=PATH --trs-file=PATH
+              [--expect-failure={yes|no}] [--color-tests={yes|no}]
+              [--enable-hard-errors={yes|no}] [--]
+              TEST-SCRIPT [TEST-SCRIPT-ARGUMENTS]
+The '--test-name', '--log-file' and '--trs-file' options are mandatory.
+END
+}
+
+test_name= # Used for reporting.
+log_file=  # Where to save the output of the test script.
+trs_file=  # Where to save the metadata of the test run.
+expect_failure=no
+color_tests=no
+enable_hard_errors=yes
+while test $# -gt 0; do
+  case $1 in
+  --help) print_usage; exit $?;;
+  --version) echo "test-driver $scriptversion"; exit $?;;
+  --test-name) test_name=$2; shift;;
+  --log-file) log_file=$2; shift;;
+  --trs-file) trs_file=$2; shift;;
+  --color-tests) color_tests=$2; shift;;
+  --expect-failure) expect_failure=$2; shift;;
+  --enable-hard-errors) enable_hard_errors=$2; shift;;
+  --) shift; break;;
+  -*) usage_error "invalid option: '$1'";;
+   *) break;;
+  esac
+  shift
+done
+
+missing_opts=
+test x"$test_name" = x && missing_opts="$missing_opts --test-name"
+test x"$log_file"  = x && missing_opts="$missing_opts --log-file"
+test x"$trs_file"  = x && missing_opts="$missing_opts --trs-file"
+if test x"$missing_opts" != x; then
+  usage_error "the following mandatory options are missing:$missing_opts"
+fi
+
+if test $# -eq 0; then
+  usage_error "missing argument"
+fi
+
+if test $color_tests = yes; then
+  # Keep this in sync with 'lib/am/check.am:$(am__tty_colors)'.
+  red='' # Red.
+  grn='' # Green.
+  lgn='' # Light green.
+  blu='' # Blue.
+  mgn='' # Magenta.
+  std=''     # No color.
+else
+  red= grn= lgn= blu= mgn= std=
+fi
+
+do_exit='rm -f $log_file $trs_file; (exit $st); exit $st'
+trap "st=129; $do_exit" 1
+trap "st=130; $do_exit" 2
+trap "st=141; $do_exit" 13
+trap "st=143; $do_exit" 15
+
+# Test script is run here.
+"$@" >$log_file 2>&1
+estatus=$?
+if test $enable_hard_errors = no && test $estatus -eq 99; then
+  estatus=1
+fi
+
+case $estatus:$expect_failure in
+  0:yes) col=$red res=XPASS recheck=yes gcopy=yes;;
+  0:*)   col=$grn res=PASS  recheck=no  gcopy=no;;
+  77:*)  col=$blu res=SKIP  recheck=no  gcopy=yes;;
+  99:*)  col=$mgn res=ERROR recheck=yes gcopy=yes;;
+  *:yes) col=$lgn res=XFAIL recheck=no  gcopy=yes;;
+  *:*)   col=$red res=FAIL  recheck=yes gcopy=yes;;
+esac
+
+# Report outcome to console.
+echo "${col}${res}${std}: $test_name"
+
+# Register the test result, and other relevant metadata.
+echo ":test-result: $res" > $trs_file
+echo ":global-test-result: $res" >> $trs_file
+echo ":recheck: $recheck" >> $trs_file
+echo ":copy-in-global-log: $gcopy" >> $trs_file
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End: