- make it sharable with GLSL
- correct the case insensitivity
- remove the map; queries are not needed, all entries need processing
- make it easier to build bottom up (will help GLSL parsing)
- support semantic checking and reporting
- allow front-end dependent semantics and attribute name mapping
This PR adds the ability to provide per-descriptor-set IO mapping shift
values. If a particular binding does not land into a per-set value,
then it falls back to the prior behavior (global shifts per resource class).
Because there were already 6 copies of many different methods and internal
variables and functions, and this PR would have added 6 more, a new API is
introduced to cut down on replication and present a cleaner interface.
For the global (non-set-specific) API, the old entry points still exist
for backward compatibility, but are phrased internally in terms of the
following.
// Resource type for IO resolver
enum TResourceType {
EResSampler,
EResTexture,
EResImage,
EResUbo,
EResSsbo,
EResUav,
EResCount
};
Methods on TShader:
void setShiftBinding(TResourceType res, unsigned int base);
void setShiftBindingForSet(TResourceType res, unsigned int set, unsigned int base);
The first method replaces the 6 prior entry points of various spellings, which
exist now in depreciated form. The second provides per-resource-set functionality.
Both accept an enum from the list above.
From the command line, the existing options can accept either a single shift value as
before, or a series of 1 or more [set offset] pairs. Both can be provided, as in:
... --stb 20 --stb 2 25 3 30 ...
which will use the offset 20 for anything except descriptor set 2 (which uses 25) and
3 (which uses 30).
This fixes:
1. A compilation error when assigning scalars to matricies
2. A semantic error in matrix construction from scalars. This was
initializing the diagonal, where HLSL semantics require the scalar be
replicated to every matrix element.
3. Functions accepting mats can be called with scalars, which will
be shape-converted to the matrix type. This was previously failing
to match the function signature.
NOTE: this does not yet handle complex scalars (a function call,
say) used to construct matricies. That'll be added when the
node replicator service is available. For now, there's an assert.
There's one new test (hlsl.scalar2matrix.frag). An existing test
lsl.type.half.frag changes, because of (2) above, and a negative
test error message changes due to (3) above.
Fixes#923.
Adds a transformation step to the post processing step.
Two modes are available:
1) keep
- Keeps samplers, textures and sampled textures as is
2) transform pure texture into sampled texture and remove pure samplers
- removes all pure samplers
- transforms all pure textures into its sampled counter part
Change-Id: If54972e8052961db66c23f4b7e719d363cf6edbd
This adds infrastructure suitable for any front end to create SPIR-V loop
control flags. The only current front end doing so is HLSL.
[unroll] turns into spv::LoopControlUnrollMask
[loop] turns into spv::LoopControlDontUnrollMask
no specification means spv::LoopControlMaskNone
Vector conditions properly convert the true/false expression types to same
width vector as the condition.
Scalar conditions make the true/false expressions convert to each other.
This is slightly cleaner today for entry-point wrapping, which sometimes made
two subtrees for a function definition instead of just one subtree. It will be
critical though for recognizing a struct with multiple member functions.
This obsoletes WIP PR #704, which was built on the pre entry point wrapping master. New version
here uses entry point wrapping.
This is a limited implementation of tessellation shaders. In particular, the following are not functional,
and will be added as separate stages to reduce the size of each PR.
* patchconstantfunctions accepting per-control-point input values, such as
const OutputPatch <hs_out_t, 3> cpv are not implemented.
* patchconstantfunctions whose signature requires an aggregate input type such as
a structure containing builtin variables. Code to synthesize such calls is not
yet present.
These restrictions will be relaxed as soon as possible. Simple cases can compile now: see for example
Test/hulsl.hull.1.tesc - e.g, writing to inner and outer tessellation factors.
PCF invocation is synthesized as an entry point epilogue protected behind a barrier and a test on
invocation ID == 0. If there is an existing invocation ID variable it will be used, otherwise one is
added to the linkage. The PCF and the shader EP interfaces are unioned and builtins appearing in
the PCF but not the EP are also added to the linkage and synthesized as shader inputs.
Parameter matching to (eventually arbitrary) PCF signatures is by builtin variable type. Any user
variables in the PCF signature will result in an error. Overloaded PCF functions will also result in
an error.
[domain()], [partitioning()], [outputtopology()], [outputcontrolpoints()], and [patchconstantfunction()]
attributes to the shader entry point are in place, with the exception of the Pow2 partitioning mode.
Since EOpMatrixSwizzle is a new op, existing back-ends only work when the
front end first decomposes it to other operations. So far, this is only
being done for simple assignment into matrix swizzles.
- fixed ParseHelper.cpp newlines (crlf -> lf)
- removed trailing white space in most source files
- fix some spelling issues
- extra blank lines
- tabs to spaces
- replace #include comment about no location
This PR handles implicit promotions for intrinsics when there is no exact match,
such as for example clamp(int, bool, float). In this case the int and bool will
be promoted to a float, and the clamp(float, float, float) form used.
These promotions can be mixed with shape conversions, e.g, clamp(int, bool2, float2).
Output conversions are handled either via the existing addOutputArgumentConversion
function, which this PR generalizes to handle either aggregates or unaries, or by
intrinsic decomposition. If there are methods or intrinsics to be decomposed,
then decomposition is responsible for any output conversions, which turns out to
happen automatically in all current cases. This can be revisited once inout
conversions are in place.
Some cases of actual ambiguity were fixed in several tests, e.g, spv.register.autoassign.*
Some intrinsics with only uint versions were expanded to signed ints natively, where the
underlying AST and SPIR-V supports that. E.g, countbits. This avoids extraneous
conversion nodes.
A new function promoteAggregate is added, and used by findFunction. This is essentially
a generalization of the "promote 1st or 2nd arg" algorithm in promoteBinary.
The actual selection proceeds in three steps, as described in the comments in
hlslParseContext::findFunction:
1. Attempt an exact match. If found, use it.
2. If not, obtain the operator from step 1, and promote arguments.
3. Re-select the intrinsic overload from the results of step 2.
Previously, an error was thrown when assigning a float1 to a scalar float,
or similar for other basic types. This allows that.
Also, this allows calling functions accepting scalars with float1 params,
so for example sin(float1) will work. This is a minor change in
HlslParseContext::findFunction().
This PR only changes a few lines of code, but is subtle.
In HLSL, comparison operators (<,>,<=,>=,==,!=) operate component-wise
when given a vector operand. If a whole vector equality or inequality is
desired, then all() or any() can be used on the resulting bool vector.
This PR enables this change. Existing shape conversion is used when
one of the two arguments is a vector and one is a scalar.
Some existing HLSL tests had assumed == and != meant vector-wise
instead of component-wise comparisons. These tests have been changed
to add an explicit any() or all() to the test source. This verifably
does not change the final SPIR-V binary relative to the old behavior
for == and !=. The AST does change for the (now explicit, formerly
implicit) any() and all(). Also, a few tests changes where they
previously had the return type wrong, e.g, from a vec < vec comparison
in hlsl.shapeConv.frag.
Promotion of comparison opcodes to vector forms
(EOpEqual->EOpVectorEqual) is handled in promoteBinary(), as is setting
the proper vector type of the result.
EOpVectorEqual and EOpVectorNotEqual are now accepted as either
aggregate or binary nodes, similar to how the other operators are
handled. Partial support already existed for this: it has been
fleshed out in the printing functions in intermOut.cpp.
There is an existing defect around shape conversion with 1-vectors, but
that is orthogonal to this PR and not addressed by it.
A need arose to use capabilities from TIntermediate during
node promotion. These methods have been moved from virtual
methods on the TIntermUnary and TIntermBinary nodes to methods
on TIntermediate, so it is easy for them construct new nodes
and so on.
This is done as a separate commit to verify that no test results
are changed as a result.
This fixes defects as follows:
1. handleLvalue could be called on a non-L-value, and it shouldn't be.
2. HLSL allows unary negation on non-bool values. TUnaryOperator::promote
can now promote other types (e.g, int, float) to bool for this op.
3. HLSL allows binary logical operations (&&, ||) on arbitrary types, similar
(2).
4. HLSL allows mod operation on arbitrary types, which will be promoted.
E.g, int % float -> float % float.
- hlsl.struct.frag variable changed to static, assignment replacd.
- Created new low level functions addBinaryNode and addUnaryNode. These are
used by higher level functions such as addAssignment, and do not do any
argument promotion or conversion of any sort.
- Two functions above are now used in RWTexture lvalue conversions. Also,
other direction creations of unary or binary nodes now use them, e.g, addIndex.
This cleans up some existing code.
- removed handling of EOpVectorTimesScalar from promote()
- removed comment from ParseHelper.cpp
This commit adds l-value support for RW texture and buffer objects.
Supported are:
- pre and post inc/decrement
- function out parameters
- op-assignments, such as *=, +-, etc.
- result values from op-assignments. e.g, val=(MyRwTex[loc] *= 2);
Not supported are:
- Function inout parameters
- multiple post-inc/decrement operators. E.g, MyRWTex[loc]++++;
If a member-wise assignment from a non-flattened struct to a flattened struct sees a complex R-value
(not a symbol), it now creates a temporary to hold that value, to avoid repeating the R-value.
This avoids, e.g, duplicating a whole function call. Also, it avoids re-using the AST node, making a
new one for each member inside the member loop.
The latter (re-use of AST node) was also an issue in the GetDimensions intrinsic decomposition,
so this PR fixes that one too.
This checkin adds a --flatten-uniform-arrays option which can break
uniform arrays of samplers, textures, or UBOs up into individual
scalars named (e.g) myarray[0], myarray[1], etc. These appear as
individual linkage objects.
Code notes:
- shouldFlatten internally calls shouldFlattenIO, and shouldFlattenUniform,
but is the only flattening query directly called.
- flattenVariable will handle structs or arrays (but not yet arrayed structs;
this is tested an an error is generated).
- There's some error checking around unhandled situations. E.g, flattening
uniform arrays with initializer lists is not implemented.
- This piggybacks on as much of the existing mechanism for struct flattening
as it can. E.g, it uses the same flattenMap, and the same
flattenAccess() method.
- handleAssign() has been generalized to cope with either structs or arrays.
- Extended test infrastructure to test flattening ability.
